首页|期刊导航|金刚石与磨料磨具工程|金刚石/铝复合材料界面处Al4C3的离散分布调控

金刚石/铝复合材料界面处Al4C3的离散分布调控OA

Regulation of discrete distribution of Al4C3 at interface of diamond/Al composites

中文摘要英文摘要

在金刚石/铝复合材料中,Al4C3相在界面处的分布特征对金刚石与铝基体之间的界面结合以及复合材料的导热性能起着决定性作用.采用气压熔渗法制备金刚石/铝复合材料,探究不同熔渗温度下金刚石颗粒不同晶面上Al4C3 粒径和覆盖率的变化趋势,及其对复合材料界面结合和导热性能的影响.结果表明,复合材料界面处Al4C3均呈离散分布,且其粒径和覆盖率均随熔渗温度的升高而增大.在熔渗温度较低时,Al4C3 优先在金刚石(100)晶面形成;而在熔渗温度较高时,Al4C3 逐渐倾向于在金刚石(111)晶面形成.当熔渗温度为 850℃时,Al4C3 在金刚石(100)晶面和(111)晶面的覆盖率分别为 47.94%和82.27%.该条件下制备的金刚石/铝复合材料成功实现对界面热导率与界面结合强度的协同优化,其热导率高达731 W/(m·K).

Objectives:Diamond/Al composites have shown great potential in thermal management applications in fields such as electronic packaging and aerospace due to their excellent thermal conductivity,low thermal expansion coefficient,and lightweight.In diamond/Al composites,Al4C3 acts as a bridge connecting diamond and the aluminum matrix.Its distribution characteristics at the interface play a decisive role in the interfacial bonding between diamond and aluminum,as well as in the thermal conductivity of the composite material.Methods:In this study,diamond/Al composites are prepared by gas pressure infiltration.The variation trends in the grain size and coverage rate of Al4C3 on different crystal faces of diamond particles at different infiltration temperatures(750,800,850,and 900℃)are investigated,as well as their impacts on the interfacial bonding and thermal conductivities of the composites.Scanning electron microscopy(SEM),energy-dispersive X-ray spectroscopy(EDS),X-ray diffraction(XRD),and Raman spectroscopy are used to analyze the microstructures of the composite interfaces and quantify the grain size and coverage rate of Al4C3 on different crystal faces of diamond particles under various infiltration temperatures.Additionally,the density of the composites is determined according to Archimedes'principle,and their thermal conductivity is measured using the laser flash method to assess the interfacial bonding conditions and thermal conductivities of the composites at different infiltration temperatures.Results:As the infiltration temperature increases,the interfacial bonding strength of the composites gradually increases,and the proportion of intergranular fracture in the cross-sectional morphology also increases.Al4C3 at the composite interface exhibits discrete distribution characteristics at all infiltration temperatures.With increasing infiltration temperature,the grain size and coverage rate of Al4C3 increase.At lower infiltration temperatures,Al4C3 tends to form more readily on the diamond(100)crystal plane;at higher infiltration temperatures,Al4C3 gradually tends to form more on the diamond(111)crystal plane.This change in distribution characteristics is related to the energies of different diamond crystal planes and the diffusion behavior of carbon atoms in aluminum.Meanwhile,as the infiltration temperature increases,the densities and thermal conductivities of the composites first increase and then decrease,which is closely related to the distribution characteristics of Al4C3 at the interface.At lower infiltration temperatures,the insufficient Al4C3 at the composite interface cannot effectively improve the interfacial bonding between diamond and aluminum.At higher infiltration temperatures,excessive Al4C3 at the composite interface provides excessive interfacial thermal resistance.When the infiltration temperature is 850℃,the average grain size of the Al4C3 on the diamond(100)crystal plane is 2.97 μm,with a coverage rate of about 47.94%;while on the(111)crystal plane,the average grain size of the Al4C3 is 3.83 μm,with a coverage rate of about 82.27%.At this temperature,the composite achieves the best interfacial bonding state,with a thermal conductivity reaching 731 W/(m·K).Conclusions:This study achieves an optimized discrete distribution of Al4C3 at the interface of diamond/Al composites by regulating the gas pressure infiltration process,investigates the growth of Al4C3 on different crystal faces of diamond,and studies the relationship between the distribution of Al4C3 at different infiltration temperatures and the interfacial bonding of the composites.When the infiltration temperature is 850℃,the composite exhibits the best interfacial bonding state,with a thermal conductivity of 731 W/(m·K).This study provides experimental evidence and theoretical guidance for the discrete interfacial modification of diamond-based metal matrix composites.

姚远卓;焦增凯;吴建杰;黄文杰;马莉;魏秋平

中南大学 粉末冶金国家重点实验室,长沙 410083中南大学 粉末冶金国家重点实验室,长沙 410083中南大学 材料科学与工程学院,长沙 410083中南大学 材料科学与工程学院,长沙 410083中南大学 粉末冶金国家重点实验室,长沙 410083中南大学 材料科学与工程学院,长沙 410083

通用工业技术

界面优化气压熔渗热导率金刚石/铝复合材料

interface optimizationgas pressure infiltration methodthermal conductivitydiamond/Al composite material

《金刚石与磨料磨具工程》 2026 (4)

427-436,10

国家十四五重点研究发展计划(2021YFB3701800)国家自然科学基金(52071345)湖南省自然科学基金(2023JJ40722).

10.13394/j.cnki.jgszz.2024.0169

评论