高温抗氧化薄膜热电偶制备及性能研究OA
Fabrication and Performance Characterization of High-Temperature Oxidation-Resistant Thin-Film Thermocouples
精准监测航空发动机热端部件的瞬态温度,是提升其推重比、延长服役寿命并保障飞行安全的核心技术基础.针对航空发动机热端部件在高温极端环境下的瞬态温度监测需求,本文采用磁控溅射方法制备了具有YAlO/Si3N4/Al2O3复合防护层的铂/氧化铟锡(Pt/ITO)薄膜热电偶,研究了复合防护层对薄膜热电偶高温抗氧化性能的影响,并对薄膜热电偶进行静态及动态响应特性测试.测试结果表明,复合防护层显著提升了薄膜热电偶的高温性能和稳定性,1200 ℃薄膜热电偶测温误差为2.2%.通过动态响应特性测试,得到带有复合防护层的薄膜热电偶平均响应时间为96.3 μs,比传统的丝式热电偶高出两个数量级.该薄膜热电偶表现出优异的稳定性和重复性,为航空发动机高温部件瞬态温度测试提供了新的技术方案.
Precise monitoring of transient temperature in the hot components of aero-engines is the fundamental technology for enhancing thrust-to-weight ratio,extending service life,and ensuring flight safety.To address the transient temperature measurement requirements for aero-engine hot-end components in extreme high temperature environments,Pt/ITO thin-film thermocouples(TFTCs)were fabricated with magnetron sputtering.The high-temperature anti-oxidation performance of YAlO/Si3N4/Al2O3 composite protective layer was systematically investigated.The static calibration results indicates that the measurement error of TFTCs with composite protection layer is below 2.2%at 1200 ℃.The dynamic response of TFTCs exhibited an average response time of 96.3 μs for the TFTCs with composite protective layer,which is two magnitude faster than that of the traditional wire thermocouples.This thin-film sensor exhibited superior stability and repeatability,which provides a novel solution for transient temperature measurement for high-temperature components of the aero-engines.
孙宇轩;梁玉婷;赵晓辉
电子科技大学,四川成都 611731电子科技大学,四川成都 611731电子科技大学,四川成都 611731
航空航天
磁控溅射热电偶响应时间复合材料复合材料防护层
magnetron sputteringthin-film thermocoupleresponse timecomposite protective layer
《航空科学技术》 2026 (7)
68-74,7
航空科学基金(20230046080008) Aeronautical Science Foundation of China(20230046080008)
评论