首页|期刊导航|航空科学技术|T800级碳纤维增强热塑性复合材料冲击凹坑回弹特性研究

T800级碳纤维增强热塑性复合材料冲击凹坑回弹特性研究OA

Study on Indentation Relaxation Characteristic of T800 Grade Carbon Fiber Reinforced Thermoplastic Composites

中文摘要英文摘要

飞机结构用复合材料的低速冲击后凹坑回弹特性对其损伤的目视检出概率具有决定性影响.本文研究了国产T800级碳纤维增强热塑性复合材料低速冲击后的凹坑回弹特性.通过落锤冲击试验机进行不同冲击能量的冲击,在标准尺寸试件150 mm×100mm中引入0.2~2.0 mm的初始凹坑深度,冲击后测量初始凹坑深度后,分别将冲击后的试样置于室温环境、湿热环境和循环载荷下,并测量冲击凹坑随着时间或循环数的变化,研究湿热环境和重复载荷对冲击凹坑回弹的影响.研究表明,冲击能量对初始凹坑和永久凹坑影响显著,湿热环境能够显著提高冲击凹坑的末期回弹量和初始回弹速率,重复载荷对凹坑末期回弹量和初始回弹速率影响不显著.为热塑性复合材料的冲击损伤和损伤阻抗合理表征及与勉强目视可见损伤(BVID)确定奠定基础,对热塑性复合材料评估和优化具有重要意义.

The relaxation characteristic of low velocity impact induced indentation in composites has a crucial effect on the visual detection probability of damage in aircraft composite structures.This paper investigates the indentation relaxation of demotic T800 grade carbon fiber reinforced thermoplastic composites is investigated after low velocity impact.Firstly,the instant low-velocity impact indentation ranging from 0.2 mm to 2.0 mm was introduced on standard specimens in dimension of 150 mm×100 mm by different impact energies with a drop weight impact tester.Then,after measuring the initial indentation depth,the impacted specimens were exposed to three distinct conditions:room temperature ambient conditions,hygrothermal environments,and cyclic loading.The temporal evolution of impact indentation was measured to reveal the effects of hygrothermal exposure and cyclic loading on indentation relaxation.The results indicate that impact energy significantly influences both initial and permanent indentation.The hygrothermal environment markedly was found to considerably enhances both the final relaxation magnitude and initial relaxation speed,whereas the cyclic loading has no significant influence on these parameters.It provides fundamental insights for rationally characterizing impact damage,assessing damage resistances,as well as for the determination of BVID in thermoplastic composite,thereby holding significant importance for the evaluation and optimization of thermoplastic composites.

段敏鸽;黄光启;李磊;宋贵宾

中国飞机强度研究所强度与结构完整性国家重点实验室,陕西西安 710065中国飞机强度研究所强度与结构完整性国家重点实验室,陕西西安 710065中国飞机强度研究所强度与结构完整性国家重点实验室,陕西西安 710065中国飞机强度研究所强度与结构完整性国家重点实验室,陕西西安 710065

航空航天

T800级碳纤维热塑性复合材料冲击凹坑回弹特性湿热环境循环载荷

T800 grade carbon fiberthermoplastic compositeimpact indentationrelaxation characteristicshygrothermal environmentcyclic loading

《航空科学技术》 2026 (7)

19-28,10

航空科学基金(2023M05723002)强度与结构完整性国家重点实验室自主课题基金(LSSIZZYJ202419) Aeronautical Science Foundation of China(2023M05723002)Independent Research Project Foundation of National key Laboratory of Strength and Structural Integrity(LSSIZZYJ202419)

10.19452/j.issn1007-5453.2026.07.003

评论