首页|期刊导航|航空科学技术|反应制备NiAl/Ni3Al/Ni叠层复合材料微观组织演变规律

反应制备NiAl/Ni3Al/Ni叠层复合材料微观组织演变规律OA

Microstructure Evolution of NiAl/Ni3Al/Ni Laminated Composites Prepared by Reaction

中文摘要英文摘要

NiAl金属间化合物是航空航天领域极具潜力的耐高温结构材料,然而单相NiAl较低的室温塑性和高温强度等问题严重限制了其工程化应用.本文通过调控Ni、Al箔材厚比和二级反应工艺制备兼具较高室温塑性和高温强度的NiAl/Ni3Al/Ni叠层复合材料.通过微观组织表征发现,二级反应过程中Ni3Al相以层状形式在NiAl层晶界处析出,形成NiAl+Ni3Al层,以颗粒形式在Ni层中析出,形成Ni+Ni3Al层.在Ni层析出Ni3Al颗粒之前,Ni3Al层主要向NiAl层生长;在Ni层析出Ni3Al颗粒之后,Ni+Ni3Al层的消耗速度增快,Ni3Al层以相近的速率同时向两侧生长.本文建立各温度条件下Ni3Al层厚-反应时间动力学模型,可以对不同二级反应条件下Ni3Al层厚进行准确预测,为Ni3Al/NiAl/Ni叠层复合板及其薄壁构件的微观组织设计提供指导,从而满足新一代高超声速飞行器对新型轻质耐高温材料及其薄壁构件的迫切要求.

NiAl intermetallic compounds are highly promising high-temperature structural materials in the aerospace field.However,the low room-temperature plasticity and high-temperature strength of single-phase NiAl have severely restricted its engineering applications.In this paper,a NiAl/Ni-Al/Ni laminated composite with both high room-temperature plasticity and high-temperature strength was prepared by regulating the thickness ratio of Ni and Al foils and adopting a two-stage reaction process.It was found through microstructure characterization that as the reaction proceeds,the Ni3Al phase precipitates in the form of layers at the grain boundaries of the NiAl layers,forming NiAl+Ni3Al layers,and precipitates in the form of particles in the Ni layers,forming Ni+Ni3Al layers.Before the Ni3Al particles precipitate in the Ni layer,the Ni3Al layer mainly grows towards the NiAl layer,in comparison,after the Ni3Al particles precipitate in the Ni layer,the consumption rate of the Ni+Ni3Al layers increases,and the Ni3Al layer grows at a similar rate towards both sides.A kinetic model of the Ni3Al layer thickness-reaction time at different temperatures was established,which can accurately predict the thickness of the Ni3Al layer under different second order reaction condition.It provides guidance for the microstructure design of Ni3Al/NiAl/Ni laminated composite sheets as well as the related thin-walled components so as to meet the urgent requirements of the new-generation hypersonic vehicles for new lightweight high-temperature materials and their thin-walled components.

秦锦涛;郑闻睿;王宝;林鹏

太原理工大学,山西太原 030024太原理工大学,山西太原 030024太原科技大学,山西太原 030024太原理工大学,山西太原 030024

矿业与冶金

Ni3Al/NiAl/Ni叠层复合板二级反应微观组织演变动力学模型扩散

Ni3Al/NiAl/Ni laminated composite sheetssecondary reactionmicrostructure evolutiondynamic modeldiffusion

《航空科学技术》 2026 (7)

10-18,9

航空科学基金(20230036029003) Aeronautical Science Foundation of China(20230036029003)

10.19452/j.issn1007-5453.2026.07.002

评论