首页|期刊导航|航空科学技术|界面结构对增材制造梯度钛合金组织性能影响

界面结构对增材制造梯度钛合金组织性能影响OA

Effect of Interface Structure on Microstructure and Properties of Additive Manufacturing Gradient Titanium Alloy

中文摘要英文摘要

梯度结构材料对高性能航空飞行器的设计和制造至关重要,良好的界面设计可显著提升构件的服役可靠性.本文采用激光沉积增材制造技术制备了具有平直型界面(TD1)和锯齿形界面结构(TD2)的两种TC4-TC21梯度钛合金.对不同梯度结构界面处进行显微组织观察以及合金元素分布检测,并探究了界面结构对室温力学性能的影响.结果表明,两种梯度结构界面处均无明显冶金缺陷;TD1结构界面处两侧柱状晶生长方向一致,α'马氏体尺寸均匀;TD2结构界面处存在一定数量的等轴晶,两区域内的柱状晶生长方向呈约45°夹角,元素在界面处的扩散速率较低;梯度合金在强度-塑性协同性方面显著提升,TD1结构展现出更优的强度性能,其抗拉强度达到979 MPa;TD2结构则表现出卓越的塑性,延伸率达12.3%.通过研究界面结构对界面结合质量的影响,为新一代高性能航空飞行器中梯度材料连接界面的强韧一体化设计提供了新思路.

Gradient-structured materials play a crucial role in the design and manufacturing of high-performance aerospace aircraft,where well-designed interfaces can significantly enhance the service reliability of components.In this paper,two types of TC4-TC21 gradient titanium alloys with flat interfaces(TD1)and sawtooth interfaces(TD2)were fabricated using the laser deposition additive manufacturing technique.The microstructure and distribution of alloying elements at the interfaces of these different gradient structures were systematically investigated,along with their influence on mechanical properties at room temperature.The results indicate that no significant metallurgical defects were observed at either of the two gradient interfaces.For the TD1 structure,the growth direction of columnar crystals on both sides of the interface is aligned,and the size of α'martensite is uniform.In contrast,the TD2 structure exhibits a certain number of equiaxed crystals at the interface,with the growth directions of columnar crystals in the two regions forming a 45° angle.Additionally,the diffusion rate of elements at the interface is relatively low.The gradient alloys demonstrated a remarkable improvement in strength-ductility synergy.The TD1 structure exhibited superior strength performance,with a tensile strength reaching 979 MPa,while the TD2 structure displayed outstanding ductility,with an elongation of 12.3%.By investigating the effect of interface structure on interfacial bonding quality,this study provides new insights into the integrated strong-toughness design of gradient material connection interfaces for next-generation high-performance aerospace aircraft.

崔灿;杨兴远;张瑞;任德春;吉海宾

航空工业沈阳飞机设计研究所,辽宁沈阳 110035||中国航空研究院,北京 100012中国科学院金属研究所,辽宁沈阳 110016航空工业沈阳飞机设计研究所,辽宁沈阳 110035||中国航空研究院,北京 100012中国科学院金属研究所,辽宁沈阳 110016中国科学院金属研究所,辽宁沈阳 110016

矿业与冶金

梯度材料钛合金界面结构显微组织力学性能

gradient materialtitanium alloyinterface structuremicrostructuremechanical property

《航空科学技术》 2026 (7)

1-9,9

航空科学基金(20230037092004) Aeronautical Science Foundation of China(20230037092004)

10.19452/j.issn1007-5453.2026.07.001

评论