首页|期刊导航|焊管|X65/316L复合管管端堆焊Inconel 625环焊接头氢分布预测

X65/316L复合管管端堆焊Inconel 625环焊接头氢分布预测OA

Hydrogen Distribution Prediction of Girth Welded Joint with Inconel 625 Overlay at Pipe-end of X65/316L Composite Pipe

中文摘要英文摘要

输氢复合管的环焊接头因异质材料与焊接残余应力的耦合作用,易发生局部氢富集,制约安全评估.针对在役接头氢分布无法原位测量的难题,结合氢渗透试验、热脱附分析与多物理场顺序耦合模拟,获取X65/Inconel 625的氢渗透参数及接头应力场,构建应力-组织耦合的氢扩散模型,预测环焊接头在12 MPa纯氢工况下的氢分布情况.结果表明,采用复合管时,X65钢基体内峰值氢浓度由均质钢管的18.5×10-8降至2.2×10-8,降幅达88.11%;局部氢富集位于打底焊道与堆焊层界面,该位置易成为氢致失效的优先起始点.研究结果可为X65/316L机械复合管环焊接头在高压输氢工况下的适用性评价提供依据.

The girth welded joint of hydrogen-transporting composite pipes are prone to localized hydrogen enrichment due to the coupling of dissimilar materials and welding residual stresses,which restricts safety assessment.To address the challenge of in-situ measurement of hydrogen distribution in service joints,hydrogen permeation tests,thermal desorption analysis,and sequential multiphysics coupling simulations were combined to obtain hydrogen permeation parameters and the stress field of the X65/Inconel 625 joint.A stress-structure-coupled hydrogen diffusion model was established to predict hydrogen distribution in the girth welded joint under 12 MPa pure hydrogen conditions.The results show that when using composite pipes,the peak hydrogen concentration in the X65 steel matrix decreases from 18.5×10-8 in homogeneous steel pipes to 2.2×10-8,a reduction of 88.11%.Localized hydrogen enrichment occurs at the interface between the root weld pass and the overlay weld layer,which is prone to becoming a preferential initiation site for hydrogen-induced failure.The findings provide a basis for evaluating the applicability of X65/316L mechanical composite pipe girth welded joints under high-pressure hydrogen transmission conditions.

高彦伟;刘云蕊;马明;刘庆儒;赵卫民;韩彬;孙建波

中油(新疆)石油工程有限公司,新疆 克拉玛依 834000中国石油大学(华东),山东 青岛 266580中油(新疆)石油工程有限公司,新疆 克拉玛依 834000中国石油大学(华东),山东 青岛 266580中国石油大学(华东),山东 青岛 266580中国石油大学(华东),山东 青岛 266580中国石油大学(华东),山东 青岛 266580

矿业与冶金

X65/316L机械复合管管端堆焊Inconel 625氢扩散焊接残余应力

X65/316L mechanical composite pipepipe-end overlay weldingInconel 625hydrogen diffusionwelding residual stress

《焊管》 2026 (8)

43-51,9

中国石油工程建设有限公司项目"纯氢长输复合管道环焊缝性能分析及焊接技术研究"(项目编号CPECC2024KJ20)江苏省前沿技术研发计划项目"埋地纯氢/掺氢天然气管道安全输气关键技术研发"(项目编号BF2024057).

10.19291/j.cnki.1001-3938.2026.08.005

评论