织物基UHF RFID转能器的激光诱导制备及其性能OA
Laser-induced preparation of fabric-based UHF RFID trans-ducers and their performance
超高频射频识别(RFID)技术是一种低成本的物联网识别技术,由于其远距离识别、多标签读取优势在各行各业中已得到普遍应用.然而,传统硬质基底的RFID转能器与柔性织物兼容性欠佳,针对这一技术瓶颈,本研究采用激光诱导石墨烯进行RFID转能器的设计和制造,并提出性能优化策略.首先通过化学亚胺化法在室温下合成可溶性PI,避免高温工艺对织物的损伤,制备织物基PI薄膜并经激光加工获得LIG导电层.其次设计了T型和环形两种偶极子转能器,并与NXP U9芯片匹配良好,实验结果表明:两种转能器在谐振频率处的S11参数分别达到-18.2 dB和-20.2 dB,阻抗带宽分别为28 MHz和24 MHz.研究成果满足可穿戴设备需求,为柔性RFID转能器的规模化制备提供创新方案,具有重要的应用价值.
UHF radio frequency identification(RFID)technology is a low-cost identification technology for the Internet of Things,which has been commonly used in various industries due to its long-range identification and multi-tag reading advantages.However,traditional RFID transducers with rigid substrates have poor compatibility with flexible fabrics.To address this technological bottleneck,laser-induced graphene was adopted for the design and fabrication of RFID trans-ducers and a performance optimization strategy was proposed.Firstly,soluble PI was synthesized at room temperature by chemical imidization method to avoid the damage to fabrics by high temperature process,and fabric-based PI films were prepared and laser processed to obtain LIG conductive layer.Then,two kinds of dipole transducers,T-type and ring-type,were designed and well matched to the NXPU9 chip,and the experimental results showed that the S11 parame-ters of the two kinds of transducers at the resonance frequency reached-18.2 dB and-20.2 dB,respectively,and the im-pedance bandwidths were 28 MHz and 24 MHz,respectively.The results of the present research meet the requirements of wearable devices,and provide an innovative solution for flexible RFID transducers,which have important application value.
高晶晶;高春燕;岳程飞;张如全
新疆理工职业大学,新疆 喀什 844000武汉纺织大学 纺织科学与工程学院,湖北 武汉 430073武汉纺织大学 纺织科学与工程学院,湖北 武汉 430073||武汉纺织大学 纺织新材料与先进加工全国重点实验室,湖北 武汉 430073武汉纺织大学 纺织科学与工程学院,湖北 武汉 430073||武汉纺织大学 纺织新材料与先进加工全国重点实验室,湖北 武汉 430073
轻工纺织
智能可穿戴织物基UHF RFID激光诱导转能器仿真
smart wearablefabric-based UHF RFIDlaser-inducedtransducer simulation
《纺织工程学报》 2026 (4)
83-89,7
湖北省重点研发计划项目(2022BAD015)
评论