首页|期刊导航|高压物理学报|梯度结构对PDC齿综合性能的影响

梯度结构对PDC齿综合性能的影响OA

Role of Gradient Structure in the Integrated Performance of PDC Cutters

中文摘要英文摘要

针对深层/超深层油气勘探对高性能聚晶金刚石复合片(polycrystalline diamond compact,PDC)齿的迫切需求,通过正交试验法优化PDC 齿的合成配方,在高温高压(8.5 GPa、1 750℃)烧结条件下,成功制备出传统均匀混合型 PDC 齿(H-PDC)以及具有"细晶工作层/粗晶过渡层"的梯度结构型 PDC 齿(G-PDC).梯度结构有助于促进钴烧结助剂的均匀分布,抑制钴的聚集,增强层间的界面结合,并产生较高的残余压应力.G-PDC 工作层中钴的质量分数为 9.16%,经酸浸脱钴后,钴的质量分数降低至 2.49%.性能测试表明:G-PDC 的耐磨寿命达到 920 车磨次数(passes),优于 H-PDC(800 passes);G-PDC 的平均冲击能为 740.0 J,较H-PDC 提升约 107%;同时,梯度结构缓解了 PDC 齿的热失配问题,使热稳定温度提高约 30℃.实验结果表明,高压烧结与梯度结构设计的协同作用会显著提升 PDC 齿的耐磨性、冲击韧性及热稳定性.本研究为面向极端工况的下一代超硬复合材料开发提供了可行路径.

Addressing the urgent demand for high-performance polycrystalline diamond compact(PDC)cutters in deep/ultra-deep oil and gas exploration,this work optimized the PDC synthesis formulation through orthogonal experimental design.Under high pressure conditions(8.5 GPa and 1 750℃),we successfully fabricated both conventional homogeneous mixed PDC cutter(H-PDC)and gradient-structured PDC cutter(G-PDC)featuring a"fine-grained work layer/coarse-grained transition layer"structure.Microstructural characterization reveals that the gradient structure facilitates uniform distribution of cobalt binder,suppresses cobalt aggregation,enhances interlayer interfacial bonding,and generates higher residual compressive stress.The cobalt mass fraction in the G-PDC work layer is 9.16%.After acid leaching for cobalt removal,the cobalt mass fraction decreased to 2.49%.Performance evaluations demonstrate that G-PDC achieves a wear resistance lifespan of 920 passes,superior to H-PDC(800 passes).The average impact toughness of G-PDC reaches 740.0 J,representing approximately 107%improvement over H-PDC.Furthermore,the gradient structure alleviates thermal expansion mismatch,increasing the thermal stability temperature by about 30℃.This research confirms that combining high pressure synthesis technology with gradient structural design can synergistically enhance the wear resistance,impact toughness,and thermal stability of PDC cutters,providing a viable pathway for developing next-generation superhard composites for extreme conditions.

高俊;王海阔;张治财;侯志强;王超;李好;杨易侃;杨娇;方锐;唐垚

浙江大学能源工程学院,浙江 杭州 310027浙江大学能源工程学院,浙江 杭州 310027浙江大学能源工程学院,浙江 杭州 310027浙江大学能源工程学院,浙江 杭州 310027浙江大学能源工程学院,浙江 杭州 310027浙江大学能源工程学院,浙江 杭州 310027浙江大学能源工程学院,浙江 杭州 310027浙江大学能源工程学院,浙江 杭州 310027浙江大学能源工程学院,浙江 杭州 310027浙江大学能源工程学院,浙江 杭州 310027

数理科学

聚晶金刚石复合片梯度结构冲击性能耐磨性能热稳定性高压烧结

polycrystalline diamond compact(PDC)gradient structureimpact performancewear resistancethermal stabilityhigh pressure sintering

《高压物理学报》 2026 (9)

116-128,13

国家自然科学基金(52073254)

10.11858/gywlxb.20251233

评论