一种焊管管端超声波相控阵检测系统研究OA
Research on Ultrasonic Phased Array Testing System for Welded Pipe End
介绍一种焊管管端超声波相控阵检测系统的检测范围,阐述该检测系统的检测方法、检测探头工作模式、自动检测流程及应用效果.该检测系统分为纵向缺陷检测、横向缺陷检测、分层缺陷检测及焊缝中间部位缺陷检测四部分,单端共设置17个通道(包括纵向缺陷检测5个通道,横向缺陷检测 4个通道,分层缺陷检测 2 个通道,焊缝中间部位缺陷检测 6个通道),能够满足钢管管端 300 mm范围内的母材、焊缝、坡口面零盲区检验标准的要求,检测速度可达 30 m/min.该检测系统的研究为焊管管端在线超声波相控阵检测提供了新的思路和方向.
Briefed in the essay is the detection scope of an ultrasonic phased array detection system for the welded pipe end,and also elaborated are the main aspects of the system,including the detection method,the detection probe working mode,the automatic detection process,and the actual application effectiveness.In the system,in total,has four major detection units respectively for longitudinal flaw detection,transverse flaw detection,lamination flaw detection and weld middle section flaw detection;17 channels are set up at a single end(including 5 channels for longitudinal flaw detection,4 channels for transverse flaw detection,2 channels for lamination flaw detection,and 6 channels for detection of weld middle section flaw),which can meet the standard requirements of zero blind zone detection of the base metal,the weld and the beveled face within 300 mm long area of the pipe end.The detection speed can reach 30 m/min.The research on this detection system provides new ideas and directions for online ultrasonic phased array detection of the welded pipe end.
汪超;周丽;王冬;范祥祥;周灿
南京钢铁股份有限公司,江苏 南京 210035||江苏金宇智能检测系统有限公司,江苏 南京 210061南京钢铁股份有限公司,江苏 南京 210035||江苏金宇智能检测系统有限公司,江苏 南京 210061南京巨龙钢管有限公司,江苏 南京 210061江苏金宇智能检测系统有限公司,江苏 南京 210061南京钢铁股份有限公司,江苏 南京 210035
焊管管端超声波相控阵检测系统零盲区柔性轮式探头
welded pipepipe endultrasonic phased array detection systemzero blind zoneflexible wheel-type probe
《钢管》 2026 (4)
71-75,5
中国石油集团渤海装备公司2025年度科研计划"直缝埋弧焊管管端智能无损检测系统关键核心技术研究"(编号:FM0325S004)
评论