小直径直缝埋弧焊管高精度形体尺寸控制技术研究OA
Research on High-precision Shape Dimension Control Technology for Small-sized Longitudinal Submerged Arc Welded(LSAW)Pipe
以 Φ610 mm×9.5 mmL450M JCOE 直缝埋弧焊管为研究对象,系统分析管端成型缝噘嘴与不圆度等关键形体尺寸在成型-焊接-扩径全流程的变化规律,揭示尺寸精度控制机制,开发针对性的全流程协同控制技术.通过优化渐开线型成型模具、构建预弯闭环控制体系、焊接抑制尺寸放大及实施缺陷前置补偿扩径等措施,实现管端成型缝噘嘴与不圆度的精准控制.现场应用表明,该技术显著提升了钢管管端形体尺寸精度,现场钢管环焊缝一次合格率从 92.0%提升至 98.5%以上,有效提升了施工效率和环焊缝质量.
Taking the Φ610 mm×9.5 mm L450M JCOE LSAW pipe as the research object,a systematic analysis is conducted to identify the variation laws of key pipe end dimensional indicators,such as the forming seam"pouting"and out-of-roundness throughout the entire forming-welding-expansion process,and reveal the dimensional accuracy control mechanism,based on which,a targeted full-process collaborative control technology is developed.As a result precise control of the forming seam"pouting"and out-of-roundness at the pipe end is obtained by means of optimizing the involute-type forming die,constructing a closed-loop control system for pre-bending,suppressing dimensional amplification during welding,and implementing defect pre-compensation in the expansion process,etc.The actual application result shows that the above mentioned technology significantly improves the shape dimensional accuracy of the pipe end,getting the primary qualification rate of the steel pipe ring weld enhanced from 92.0%to over 98.5%so as to obviously improve the construction efficiency and the ring weld quality as well.
马建军
南京巨龙钢管有限公司,江苏 南京 210061
直缝埋弧焊管小直径噘嘴不圆度全流程协同
LSAW pipesmall-sizedpoutingout-of-roundnessfull-process collaboration
《钢管》 2026 (4)
38-43,6
评论