首页|期刊导航|Journal of Materiomics|Beyond sintering:Emerging low-temperature strategies for functional ceramics

Beyond sintering:Emerging low-temperature strategies for functional ceramicsOA

中文摘要

Since the dawn of human civilization,ceramics have been closely associated with fire.The earliest ceramic artifacts,likely created accidently when wet clay was hardened by heat,have been discovered in Moravia,Czech Republic,dating back to around 29,000–27,000 BP,whereas the earliest known functional pottery intended for practical use appears at the Xianrendong site in China,around 20,000 BP.From that early experimentation with fire,the use of fire to densify loose powders has defined the essence of ceramics.For thousands of years,sintering has remained the central process for transforming soft,low-density green bodies into dense and hard solids.Even in the modern era,high-temperature processing is still required to achieve the desired strength,density,and functionality of ceramic materials.However,as ceramics are increasingly used in microelectronics,flexible devices,and large-scale integrated systems,the reliance on high-temperature sintering has become a major technological challenge.High thermal budgets lead to excessive energy consumption and cause compatibility problems with metal electrodes,polymer substrates,and silicon-based platforms.These limitations motivate the search for alternative approaches that can form dense ceramic solids at much lower temperatures,specifically regimes far below the melting point(e.g.,0.1−0.2Tm)[1]or within the thermal budget(<400°C)compatible with standard CMOS processes.

Binjie Chen;Zhongshang Dou;Hang Xie;Qiong Wu;Zhipeng Xing;Chao-Feng Wu;Fang-Zhou Yao;Wen Gong;Ke Wang

Research Center for Advanced Functional Ceramics,Wuzhen Laboratory,Jiaxing,314500,Zhejiang,China School of Materials Science and Engineering,Shaanxi Normal University,Xi''an,710062,ChinaResearch Center for Advanced Functional Ceramics,Wuzhen Laboratory,Jiaxing,314500,Zhejiang,ChinaResearch Center for Advanced Functional Ceramics,Wuzhen Laboratory,Jiaxing,314500,Zhejiang,China School of Materials Science and Engineering,Shaanxi Normal University,Xi''an,710062,ChinaState Key Laboratory of New Ceramics and Fine Processing,School of Materials Science and Engineering,Tsinghua University,Beijing,100084,ChinaResearch Center for Advanced Functional Ceramics,Wuzhen Laboratory,Jiaxing,314500,Zhejiang,China State Key Laboratory of New Ceramics and Fine Processing,School of Materials Science and Engineering,Tsinghua University,Beijing,100084,ChinaCenter of Advanced Ceramic Materials and Devices,Yangtze Delta Region Institute of Tsinghua University,Jiaxing,314006,Zhejiang,ChinaResearch Center for Advanced Functional Ceramics,Wuzhen Laboratory,Jiaxing,314500,Zhejiang,China Center of Advanced Ceramic Materials and Devices,Yangtze Delta Region Institute of Tsinghua University,Jiaxing,314006,Zhejiang,ChinaResearch Center for Advanced Functional Ceramics,Wuzhen Laboratory,Jiaxing,314500,Zhejiang,ChinaState Key Laboratory of New Ceramics and Fine Processing,School of Materials Science and Engineering,Tsinghua University,Beijing,100084,China

化学化工

functional ceramicsdensify loose powderssinteringflexible deviceslow temperature strategiesmicroelectronicshigh temperature processingceramic artifactslikely

《Journal of Materiomics》 2026 (3)

P.112-116,5

supported by National Key R&D Program of China(No.2024YFB3211800)National Natural Science Foundation of China(No.52032005,52325204,52421001,U22A20254,12474213,52572139)China Postdoctoral Science Foundation(No.2025M770011)Zhejiang Provincial Postdoctoral Research Project Merit-based Funding(No.ZJ2025149).

10.1016/j.jmat.2026.101186

评论