首页|期刊导航|Journal of Materiomics|Processing strong MgAl_(2)O_(4)ceramics via zirconia transformation toughening

Processing strong MgAl_(2)O_(4)ceramics via zirconia transformation tougheningOA

中文摘要

The applications of magnesium aluminate spinel(MgAl_(2)O_(4))ceramics often require optical transparency,suggesting minimal macroscopic flaws otherwise too strong light scattering would make them opaque.Yet the flexural strength typically in 200–350 MPa range is unsatisfactory,suggesting rather large critical flaw size for fracture in brittle materials.Such inconsistency makes MgAl_(2)O_(4)an interesting system to study ceramic processing,strengthening,and toughening.Here,we reported progress in pressurelessly sintered zirconia toughened MgAl_(2)O_(4)ceramics with 700 MPa flexural strength,surpassing those reported in the literature by hot pressing and other techniques.The new advance was achieved by colloidal processing and two-step sintering,for improved microstructural control,minimized microscopic defects,uniform two-phase distribution,and suppressed grain growth.We found ZrO_(2)acts as sintering aid for MgAl2O4,effectively lowering the sintering temperature by 150℃.The optimized two-step sintering was conducted first at 1325°C without holding reaching a critical relative density of 93%,and then at 1225℃for 20 h for full densification.The low pressureless sintering temperature of 1225℃plus the two-phase inter-pinning refine the grain size to 184 nm for MgAl_(2)O_(4)and 155 nm for zirconia,offering microstructural benefits for strengthening.The zirconia grains stabilized by matrix constrain and partial Mg2+alloying are mostly tetragonal and mechanically transformable,offering active toughening mechanism to reduce flaw sensitivity.The fracture is intra-granular for MgAl_(2)O_(4)and mixed intra-and inter-granular for zirconia.Our work demonstrates the possibility to further strengthen MgAl_(2)O_(4)ceramics towards 1 GPa for advanced and new applications.

Shichang Cheng;Hongbing Yang;Yao Han;Chang-An Wang;Yanhao Dong

State Key Lab of New Ceramic Materials,School of Materials Science and Engineering,Tsinghua University,Beijing,100084,ChinaState Key Lab of New Ceramic Materials,School of Materials Science and Engineering,Tsinghua University,Beijing,100084,ChinaState Key Lab of New Ceramic Materials,School of Materials Science and Engineering,Tsinghua University,Beijing,100084,ChinaState Key Lab of New Ceramic Materials,School of Materials Science and Engineering,Tsinghua University,Beijing,100084,ChinaState Key Lab of New Ceramic Materials,School of Materials Science and Engineering,Tsinghua University,Beijing,100084,China

化学化工

Magnesium aluminate spinel(MgAl_(2)O_(4))ZirconiaSinteringMicrostructureMechanical properties

《Journal of Materiomics》 2026 (5)

P.225-232,8

supported by National Key Research and Development Program of China(grant no.2023YFB3812000)National Natural Science Foundation of China(NSFC-No.52472074 and 52372064).

10.1016/j.jmat.2026.101278

评论