Fault-tolerant control of a mole cricket-inspired quadruped robot with functional arms under single-leg lossOA
Loss of leg function in quadruped robots often leads to severe mobility degradation in complex environments.Inspired by the effective forelimb utilization of the oriental mole cricket,this paper proposes a cooperative compensation strategy that integrates morphological design,gait optimization,and reinforcement learning to address single-leg failure.A novel configuration of a sprawled-posture quadruped robot equipped with two functional arms is developed.Based on kinematic analysis and the longitudinal stability margin criterion,a dynamic gait adjustment method is derived.Two control frameworks-a Central Pattern Generator(CPG)model and a Deep Deterministic Policy Gradient(DDPG)reinforcement learning approach-are developed and eval-uated.Simulation results demonstrate that the bio-inspired arm compensation effectively mitigates yaw motion during foreleg failure.For the more challenging hindleg failure,the reinforcement learning controller sig-nificantly outperforms CPG limiting yaw fluctuation to a narrow range of-0.11 to-0.09 rad.Physical ex-periments validate that the proposed strategy restores walking performance to over 85%of the normal per-formance.After reinforcement learning training,mobility is not only fully recovered but slightly surpasses normal performance,with yaw error approaching zero.This work demonstrates a"morphology-control"co-operative compensation paradigm,enhancing fault tolerance and robustness of legged robots in unstructured hazardous environments.
Yuhe Guo;Hu Zhang;Yan Zhang;Chenxu Lu;Xinghua Lin;Hao Wang;Delei Fang
Tianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry&Food Machinery and Equipment,College of Mechanical Engineering,Tianjin University of Science&Technology,Tianjin 300457,ChinaTianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry&Food Machinery and Equipment,College of Mechanical Engineering,Tianjin University of Science&Technology,Tianjin 300457,China B&H Unmanned Intelligent System Research Institute,Beijing Institute of Technology,Hefei 230000,ChinaTianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry&Food Machinery and Equipment,College of Mechanical Engineering,Tianjin University of Science&Technology,Tianjin 300457,ChinaTianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry&Food Machinery and Equipment,College of Mechanical Engineering,Tianjin University of Science&Technology,Tianjin 300457,ChinaTianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry&Food Machinery and Equipment,College of Mechanical Engineering,Tianjin University of Science&Technology,Tianjin 300457,ChinaTianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry&Food Machinery and Equipment,College of Mechanical Engineering,Tianjin University of Science&Technology,Tianjin 300457,ChinaTianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry&Food Machinery and Equipment,College of Mechanical Engineering,Tianjin University of Science&Technology,Tianjin 300457,China
信息技术与安全科学
Quadruped Robot·Functional ArmCompensation-GaitOptimization-FaultTolerance
《Advanced Bionics》 2026 (1)
P.33-46,14
supported by the National Natural Science Foundation of China(Grant Nos.51405341,62403356,62301360)The Youth Project of Tianjin Natural Science Foundation(No.25JCQNJC01070)Tianjin Special Fund for Guiding Technological Innovation(Grant No.25YDTPJC00930)。
评论