首页|期刊导航|International Journal of Transportation Science and Technology|Characterization of binder and asphalt mixture modified with waste toner

Characterization of binder and asphalt mixture modified with waste tonerOA

中文摘要

Incorporating waste materials as additives in road and highway construction offers significant economic and environmental advantages.This study utilizes waste toner(WT)as an additive in binder and asphalt mixture at varying percentages(0%,5%,10%,15%,20%)of the binder’s volume.Standard asphalt binder tests for penetration,ductility,softening point,flash and fire points,and specific gravity are conducted.Additionally,Superpave performance grading(PG)tests are carried out with devices such as rolling thin-film oven(RTFO),pressure aging vessel(PAV),dynamic shear rheometer(DSR),and bending beam rheometer(BBR).Modified asphalt mixtures undergo tests for Marshall stability and flow,dynamic creep,and fatigue(indirect tensile modulus test).The results reveal tthat,when the WT content increases,penetration and ductility decrease,while specific gravity,softening point,flash point,fire point,and rotational viscosity(RV)increase.The DSR test indicates an enhancement in rutting resistance for asphalt-WT binders.The dynamic creep test demonstrates an increase in resilient modulus and creep stiffness compared with conventional asphalt mixtures,resulting in a reduction in cumulative strain and permanent rutting values.The fatigue test shows an improvement in pavement life,thanks to higher resilient modulus values and lower total horizontal recoverable deformation,enhancing fatigue cracking resistance in the modified asphalt mixture.The PG of the asphalt binder with 5%and 10%WT is 82–22.Also,the final PG of the asphalt binder with 15%and 20%WT content is 82–16,which is suitable for use in high-temperature regions.Therefore,incorporating an appropriate amount of WT into binder significantly enhances road pavement performance,especially in high-temperature regions.Additionally,this research offers a promising alternative recycling approach for WT,leading to substantial environmental benefits.Thus,the process can be deemed both feasible and viable.

Taisir Khedaywi;Madhar Haddad;Hashem Al-Masaeid;Islam Abu Mharib;Shaima Hawari

Department of Civil Engineering,Jordan University of Science and Technology,Irbid 22110,JordanDepartment of Architectural Engineering,United Arab Emirates University,Al Ain,the United Arab EmiratesDepartment of Civil Engineering,Jordan University of Science and Technology,Irbid 22110,JordanDepartment of Civil Engineering,Jordan University of Science and Technology,Irbid 22110,JordanDepartment of Civil Engineering,Jordan University of Science and Technology,Irbid 22110,Jordan

交通工程

Waste toner(WT)SuperpaveMarshallDynamic creepFatigue

《International Journal of Transportation Science and Technology》 2026 (2)

P.424-446,23

funded by grant no.2022-510 from JUST.Many thanks.

10.1016/j.ijtst.2025.05.005

评论