Effect of high-temperature aging treatment on strength enhancement of the as-cast Mg-8Li-6Zn-1Y(in wt.%)alloyOA
Based on the microstructural evolution of an as-cast Mg-8Li-6Zn-1Y alloy after being performed high-temperature aging treatment at300℃,330℃,and 400℃,it reveals that nano-sized quasi-crystalline structured I-phase particles are precipitated in α-Mg matrix,whereas the high density of MgLiZn particles present in β-Li matrix are mostly dissolved during thermal aging process.With increasing aging temperature and time,the size and quantity of precipitated I-phase particles increase gradually.For differently aged samples,the hardness values of β-Li matrix phase increase from 75 HV to 115 HV during the initial aging for up to 1 h and then stabilize at 115 HV with further prolonging the aging time,whereas the hardness values of a-Mg matrix phase change slightly and vary from 62 HV to 70 HV.The maximum macro hardness values corresponding to peak-aged conditions of 300℃/16 h,330℃/8 h,and 400℃/4 h are respectively 89 HV,96 HV,and 87 HV.Tensile results demonstrate that the 330℃/8 h sample has the yield strength of 179 MPa and the ultimate tensile strength of233 MPa,whereas those of as-cast sample are 116 MPa and 166 MPa,respectively.The main strengthening mechanism of high-temperature aged samples is attributed to the precipitation strengthening of nano-sized I-phase particles and solid solution strengthening because of the dissolution of MgLiZn phase.
Baojie Wang;Dongliang Wang;Daokui Xu;Zishuo Chen;Shuo Wang
School of Environmental and Chemical Engineering,Shenyang Ligong University,Shenyang 110159,ChinaShenyang National Laboratory for Materials Science,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China School of Materials Science and Engineering,University of Science and Technology of China,Shenyang 110016,ChinaShenyang National Laboratory for Materials Science,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China School of Materials Science and Engineering,University of Science and Technology of China,Shenyang 110016,ChinaSchool of Environmental and Chemical Engineering,Shenyang Ligong University,Shenyang 110159,China Shenyang National Laboratory for Materials Science,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,ChinaShenyang National Laboratory for Materials Science,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China School of Materials Science and Engineering,University of Science and Technology of China,Shenyang 110016,China
矿业与冶金
Mg-Li based alloyI-phaseThermal agingPrecipitationMechanical behavior
《Journal of Magnesium and Alloys》 2026 (7)
P.126-138,13
funded by the National Natural Science Foundation of China Projects under Grant[Nos.U21A2049,52071220,51871211]Liaoning Province’s project of“Revitalizing Liaoning Talents”(XLYC1907062)the Innovation Fund of Institute of Metal Research(IMR)Chinese Academy of Sciences(CAS).
评论