Lüders strain ductilizes a 1.2 GPa high-strength metastable steel via delaying martensite transformationOA
The formation of Lüders bands tends to result in premature necking and reduced ductility in metallic materials.Studies have shown that the martensite(α′)transformation can stabilize Lüders bands and decrease Lüders strain in metastable materials.However,the impact of Lüders strain on theα′transformation and deformation mechanisms of materials with high ductility is not well understood.This study compares the relationship between uniform strain,Lüders strain,and microstructural evolution in an austenitic stainless steel.By combining the high stability of theγphase and Lüders strain,we believe that Lüders strain can ductilize a 1.2 GPa high-strength metastable steel via delaying martensite transformation.The main deformation mechanism is dislocation slip during the first initial Lüders strain(band 1),rather than stress-assisted martensite transformation.Subsequently,α′transformation is activated due to increasing true stress,leading to further plastic strain.The true stress remains basically stable during the Lüders strain 1 and cannot efficiently induceα′transformation.In contrast,the rapid increase in stress during uniform strain further accelerates theα′transformation in sample A10,resulting in high strength but moderate ductility in the sample with continuous yielding,like the conventional transformation-induced plasticity effect.The delayedα′transformation behavior during Lüders strain presents a new opportunity for developing high-performance metastable steels.
Tianle Li;Renhao Wu;Lezong Chen;Zaigham Saeed Toor;Xiaochun Liu;Hyoung Seop Kim
School of Material Science and Engineering,Changsha University of Science&Technology,Changsha 410004,ChinaAdvanced Institute for Materials Research(WPI-AIMR),Tohoku University,Sendai,980-8577,Japan Graduate Institute of Ferrous&Eco Materials Technology,Pohang University of Science&Technology,Pohang,37673,South KoreaSchool of Material Science and Engineering,Changsha University of Science&Technology,Changsha 410004,ChinaGraduate Institute of Ferrous&Eco Materials Technology,Pohang University of Science&Technology,Pohang,37673,South KoreaSchool of Material Science and Engineering,Changsha University of Science&Technology,Changsha 410004,ChinaAdvanced Institute for Materials Research(WPI-AIMR),Tohoku University,Sendai,980-8577,Japan Graduate Institute of Ferrous&Eco Materials Technology,Pohang University of Science&Technology,Pohang,37673,South Korea
矿业与冶金
Lüders strainMartensite transformation1.2 GPa yield strengthStrength-ductility synergyAustenitic stainless steel
《Advanced Powder Materials》 2026 (4)
P.98-106,9
supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP)(NRF-2022R1A5A1030054).
评论