首页|期刊导航|中国塑料|PBAT与塑化剂对PBAT/PLA/淀粉共混薄膜力学与延时边封性能的影响

PBAT与塑化剂对PBAT/PLA/淀粉共混薄膜力学与延时边封性能的影响OA

Effects of PBAT content and plasticizer on mechanical and delayed edge-sealing properties of PBAT/PLA/Starch blended films

中文摘要英文摘要

采用熔融共混法制备聚对苯二甲酸-己二酸丁二醇酯(PBAT)、聚乳酸(PLA)、淀粉的共混物并制备成薄膜,并探究了PBAT与塑化剂对于共混薄膜力学性能与延时边封性能的影响.结果表明,低淀粉含量的1#样品拉伸强度最高,随着淀粉含量的增加,拉伸强度逐步下降.将PBAT聚酯替代为低MFR的A400 LF时,薄膜的拉伸强度得到明显提升;塑化越优,薄膜拉伸强度越低,引入TPS后纵横向强度降低,然而其纵向撕裂强度达到最高值7 032 mN;引入TPS的薄膜样品的延时边封性能达到最优,15天边封强度保持率(R15d)为98.5%,且手撕等级保持率也达到最优,15天时的边封等级依然为5级;引入TPS的体系,淀粉分子以小粒径形态分散于体系中.

Poly(butylene adipate-co-terephthalate)(PBAT)/polylactic acid(PLA)/starch blends were prepared via melt blending and subsequently processed into films.The effects of PBAT content and plasticizer type on the mechanical prop-erties and delayed edge-sealing performance of the resulting films were systematically investigated.Mechanical testing re-vealed that the 1#formulation,which contained the lowest starch content,exhibited the highest tensile strength,with val-ues gradually decreasing as starch loading increased.Replacing the PBAT polyester with A400 LF,characterized by a lower melt flow index,substantially enhanced the tensile strength of the films,and the tensile properties were found to correlate strongly with the degree of plasticization.Upon introducing thermoplastic starch(TPS),both longitudinal and transverse tensile strengths declined;however,the longitudinal tear strength reached a maximum of 7 032 mN.Delayed edge-sealing tests indicated that TPS-containing samples achieved optimal performance,with an edge-sealing strength re-tention rate of 98.5%at 15 days(R15d)and the highest hand-tear and edge-sealing ratings(both grade 5)at the same interval.Scanning electron microscopy further confirmed the superior edge-sealing performance of TPS-modified films,revealing finely dispersed starch particles with small sizes.

陈业中;陈保登;郭昊威;麦开锦;李禹函;张怡

珠海金发生物材料有限公司,广东 珠海 519050||广州航海学院,先进材料研究院,广州 510725||郑州大学化学学院,郑州市弹性密封材料重点实验室,郑州 450001广州航海学院,先进材料研究院,广州 510725广州航海学院,先进材料研究院,广州 510725广州航海学院,先进材料研究院,广州 510725郑州大学化学学院,郑州市弹性密封材料重点实验室,郑州 450001珠海金发生物材料有限公司,广东 珠海 519050

化学化工

聚对苯二甲酸己二酸丁二醇酯塑化剂淀粉力学性能延时边封

poly(butylene terephthalate adipate)plasticizerstarchmechanical propertydelayed edge sealing

《中国塑料》 2026 (8)

37-42,6

重点新材料研发及应用国家科技重大专项(2024ZD0603600)

10.19491/j.issn.1001-9278.2026.08.007

评论