首页|期刊导航|中国塑料|粉末丁苯橡胶和DOA协同低温增韧氯化聚氯乙烯复合材料

粉末丁苯橡胶和DOA协同低温增韧氯化聚氯乙烯复合材料OA

Synergistic toughening of chlorinated polyvinyl chloride at low temperatures using powdered styrene-butadiene rubber and dioctyl adipate

中文摘要英文摘要

为提高氯化聚氯乙烯(CPVC)的低温冲击性能,以粉末丁苯橡胶(PSBR)和己二酸二辛酯(DOA)为增韧剂和增塑剂,采用熔融共混制备了PSBR/CPVC和PSBR/DOA/CPVC复合材料.研究了PSBR质量份数对CPVC和DOA/CPVC在不同温度下的冲击强度、拉伸性能、阻燃性能、维卡软化温度、热稳定性和断面形貌的影响.研究表明,添加1份和3份PSBR使CPVC在15℃和低温(-15、30℃)的缺口冲击强度分别提高30.4%和41.0%、54.5%;适量添加PSBR可改善CPVC的维卡软化温度、断裂伸长率和热稳定性;过量PSBR在CPVC中分散不均和聚集,使PSBR/CPVC综合力学性能明显降低;添加10份DOA提高了CPVC中PSBR颗粒的均匀细化分散,但使PSBR/CPVC拉伸强度、极限氧指数和维卡软化温度有所降低;DOA和PSBR的协同增韧效应,使PSBR/DOA/CPVC(5/10/95)具有较好的综合力学性能.与CPVC性能比较,15、-15、-30℃时PSBR/DOA/CPVC(5/10/95)的冲击强度分别提高437.8%、98.7%和175.0%,同时保持较高拉伸强度(36.5 MPa)、断裂伸长率(22.9%)和极限氧指数(33.0%).

To enhance the low-temperature impact resistance of chlorinated polyvinyl chloride(CPVC),powdered styrene-butadiene rubber(PSBR)and dioctyl adipate(DOA)were employed as a toughening agent and plasticizer,respectively.PSBR/CPVC and PSBR/DOA/CPVC compounds were prepared by melt blending.The effects of PSBR content on im-pact strength at various temperatures,tensile properties,flame retardancy,Vicat softening temperature,thermal stabili-ty,and fracture morphology were systematically investigated for both CPVC and DOA/CPVC systems.Results showed that incorporating 1 or 3 phr of PSBR into CPVC increased the notched impact strength by 30.4%and 41.0%at 15℃,and by 54.5%at both-15℃and-30℃,respectively.An appropriate PSBR loading also improved the Vicat soften-ing temperature,elongation at break,and thermal stability.However,excessive PSBR led to poor dispersion and agglom-eration,causing a significant decline in overall mechanical performance.The addition of 10 phr DOA promoted finer dis-persion of PSBR particles within the CPVC matrix,albeit with reductions in tensile strength,limiting oxygen index,and Vicat softening temperature.Owing to the synergistic toughening effect of DOA and PSBR,the PSBR/DOA/CPVC(5/10/95)formulation exhibits the best balanced properties.Compared with neat CPVC,this compound achieved impact strength increases of 437.8%,98.7%,and 175.0%at 15℃,-15℃,and-30℃,respectively,while retaining rela-tively high tensile strength(36.5 MPa),elongation at break(22.9%),and limiting oxygen index(33.0%).

余闻达;周松;王涛;罗玉梅

西南石油大学新能源与材料学院,成都 610500西南石油大学新能源与材料学院,成都 610500金杯电工(成都)有限公司,成都 610500西南石油大学新能源与材料学院,成都 610500

化学化工

氯化聚氯乙烯粉末丁苯橡胶己二酸二辛酯低温冲击性能协同增韧效应

chlorinated polyvinylchloridepowdered styrene-butadiene rubberdioctyl adipatelow-temperature impact propertysynergistic toughening effect

《中国塑料》 2026 (8)

23-29,7

10.19491/j.issn.1001-9278.2026.08.005

评论