首页|期刊导航|中国钼业|江西某铜矿大断面巷道变形破坏特征及支护控制技术研究

江西某铜矿大断面巷道变形破坏特征及支护控制技术研究OA

Deformation and failure characteristics and support control technology of large-section chambers in a copper mine in Jiangxi Province

中文摘要英文摘要

针对大断面巷道的围岩变形破坏问题,以江西某铜矿的大断面巷道为研究对象,采用理论分析、数值模拟、现场工业性试验的综合研究方法对大断面巷道围岩变形破坏规律进行了研究,并提出了合理的支护优化方案.结果表明:大断面巷道的破坏形态呈现出非对称性,为"类蝶形",顶板塑性区最大深度为7 m,两帮最大破坏深度为2 m,结合理论计算得出了大断面巷道的支护参数.通过大断面巷道表面位移监测发现支护优化方案有效维护了巷道围岩稳定,支护效果良好.

Aiming at the problem of surrounding rock deformation and failure in large-section chambers,taking the large-section cham-ber of a copper mine in Jiangxi Province as the research object,a comprehensive research method combining theoretical analysis,nu-merical simulation and on-site industrial tests was adopted to study the deformation and failure law of the surrounding rock in large-sec-tion chambers,and a reasonable support optimization scheme was proposed.The results show that the failure mode of the large-section chamber presents asymmetry,which is"butterfly-like".The maximum depth of the plastic zone of the roof slab is 7 m,and the maxi-mum failure depth on both sides is 2 m.Combined with theoretical calculations,the support parameters of the large-section chamber are obtained.Through the monitoring of surface displacement in large-section chambers,it was found that the optimized support scheme ef-fectively maintained the stability of the surrounding rock of the roadway and achieved good support results.

左小华;刘志华;叶宝杰;张琦;方福平;张爽;谢凌琛

江西铜业股份有限公司永平铜矿,江西上饶 334000江西铜业股份有限公司永平铜矿,江西上饶 334000江西铜业股份有限公司永平铜矿,江西上饶 334000江西铜业股份有限公司永平铜矿,江西上饶 334000江西铜业股份有限公司永平铜矿,江西上饶 334000长沙迪迈科技股份有限公司,湖南长沙 410000长沙迪迈科技股份有限公司,湖南长沙 410000

矿业与冶金

大断面巷道数值模拟塑性破坏围岩控制支护参数

large-section chambernumerical simulationplastic failuresurrounding rock controlsupport parameters

《中国钼业》 2026 (4)

46-52,7

10.13384/j.cnki.cmi.1006-2602.2026.04.006

评论