首页|期刊导航|新型炭材料(中英文)|微米级碳骨架优化实现低膨胀硅碳复合材料并用于高性能锂离子电池

微米级碳骨架优化实现低膨胀硅碳复合材料并用于高性能锂离子电池OA

Changing the carbon framework to produce low-expansion silicon-carbon composites for high-performance lithium-ion batteries

中文摘要英文摘要

硅碳(Si/C)复合材料因其高比容量,已成为下一代锂离子电池负极的重要候选者,但其严重的体积膨胀制约商业化进程.本文报道了一种基于硅烷热解反应的化学气相沉积制备方法,用于将超细纳米硅沉积到多孔碳骨架中,并随后进行碳包覆,最终实现了公斤级硅碳复合材料的合成.该多孔炭富含大量微孔(平均孔径约 1.9 nm),可有效对非晶硅进行空间限域,从结构层面缓冲其因脱(嵌)锂引起的体积变化.所得 Si/C材料的硅沉积量达 56.76%,比容量为 2179 mAh/g,首次库仑效率高达 93.5%,比表面积仅 1.32 m2/g.除纳米限域效应外,本文阐明碳骨架的微米级粒径(D50:7.3~13.0 μm)可调控机械强度、包覆均匀性与锂离子传输行为.当多孔炭粒径 D50 为 8.2 μm时,其对应的 Si/C 复合材料在脱嵌锂、低温锂离子传输动力学、高温副反应等方面实现更优的综合性能,并实现更低35.8%的膨胀率(嵌锂态 vs.脱锂态),3 C 倍率容量保持率相对于 0.1 C 达 97.0%,60 ℃/-20 ℃温度下对比室温条件的首次库仑效率差异较小.采用 Si/C 复合物与石墨复配的复合负极,匹配 NCM523正极,制得软包电池,其 1 C循环 1000圈后容量保持率 87.46%,展现出其超长循环与低膨胀特性.本研究为硅碳负极结构设计及规模化生产提供有效思路.

Silicon-carbon(Si/C)composites are promising high-capacity anode materials for next-generation lithium-ion batteries,but their commercialization is hindered by their severe volume expansion during cycling.We report a chem-ical vapor deposition method using the pyrolysis of silane,in which ultrafine nano-Si enters a porous carbon framework to produce kilogram-scale Si/C composites.The carbon frame-work with abundant micropores(~1.9 nm),confines the amorphous silicon and accommodates the volume changes of nano-Si during both lithiation and de-lithiation.The res-ulting Si/C composites have a 56.76%Si content and have a specific capacity of 2179 mAh g-1,a high initial Coulombic efficiency(ICE)of 93.5%,and a low specific surface area(1.32 m2 g-1).In addition to the nanoconfinement effect,the median particle size(D50,7.3-13.0 μm)of the carbon framework was shown to control the mechanical strength,coating uni-formity and Li+transport.A D50 of 8.2 μm endows the Si/C composites with outstanding comprehensive properties.They have an excellent rate performance with a 97.0%retention at 3 C relative to 0.1 C,show only minor variations in ICE difference at 60℃/-20℃compared with room temperature,and have a low expansion of 35.8%from the delithiated to the lithiated state.The composite was then mixed with graphite to prepare the anode,which was then paired with an NCM523 cathode to as-semble pouch cells.The pouch cell retained 87.46%of its initial capacity after 1000 cycles at 1 C.Because of the low expan-sion of the electrode,the material avoids structural degradation during cycling and thus has an excellent long-term stability.

叶林;黄强;彭工厂;田桂雷;白洪友;周小清;王军阔

成都硅宝科技股份有限公司,四川 成都,610000||中国科学院成都有机化学有限公司,四川 成都,610000||硅宝(眉山)新能源材料有限公司,四川 眉山,620860成都硅宝科技股份有限公司,四川 成都,610000||硅宝(眉山)新能源材料有限公司,四川 眉山,620860中国科学院成都有机化学有限公司,四川 成都,610000硅宝(眉山)新能源材料有限公司,四川 眉山,620860硅宝(眉山)新能源材料有限公司,四川 眉山,620860硅宝(眉山)新能源材料有限公司,四川 眉山,620860硅宝(眉山)新能源材料有限公司,四川 眉山,620860

化学化工

硅碳复合材料纳米空间限域微米尺度优化低膨胀可规模化生产

Si/C compositesNanoconfinement effectMicron-scale optimizationLow-expansionMass-producible

《新型炭材料(中英文)》 2026 (4)

961-976,16

This work was supported by Chengdu Municipal Human Resources and Social Security Bureau and Sichuan Provincial Department of Human Resources and Social Security(TB2024004). 成都市人社局、四川省人社厅资助(TB2024004)

10.1016/S1872-5805(26)61109-2

评论