首页|期刊导航|应用数学和力学|UHMWPE-金属复合装甲板在复合弹冲击下的响应研究

UHMWPE-金属复合装甲板在复合弹冲击下的响应研究OA

Response Characteristics of UHMWPE-Metal Composite Armor Plates Subjected to Combined Blast-Fragment Impact

中文摘要英文摘要

为研究超高分子量聚乙烯纤维(UHMWPE)增强复合材料/金属复合装甲板在爆炸与破片联合载荷作用下的损伤机制与防护性能,通过复合弹模拟爆炸与破片联合冲击的实验方法,系统分析了不同冲击速度下复合装甲板的典型失效模式.在此基础上,通过有限元方法对实验结果进行了验证,并进一步探究了面板结构布局对其动态响应的关键影响.研究结果表明:UHMWPE 前置复合板中,钢板的刚性约束限制了纤维层大变形能力,但提升了应力扩散效应,使其表现出更优的抗爆性能;UHMWPE 后置复合板中,UHMWPE 层可充分释放黏弹性变形潜能,通过大变形耗散破片动能,具有更优的抗侵彻能力;两种构型防护效能的差异源于材料排布顺序引发的约束效应差异,该效应直接影响复合结构中的能量分配机制与失效模式演进.

The damage mechanisms and ballistic performance of ultra-high molecular weight polyethylene(UH-MWPE)fiber reinforced composite/metal armor plates were investigated under combined blast and fragment impact.The combined loading experiments were conducted with composite projectiles.The typical failure modes of the armor plates at varying impact velocities were systematically analyzed.On this basis,the finite el-ement method was employed to validate the experimental results.Furthermore,the key influence of the panel structure layout on its dynamic response was further explored.The results demonstrate that,in the configura-tion with UHMWPE at the front,the rigid constraint imposed by the steel plate restricts the large deformation capacity of the fiber layers.However,it enhances the stress diffusion effect.Consequently,this configuration exhibits superior blast resistance.Conversely,in the configuration with UHMWPE at the back,the UHMWPE layer fully exerts its potential of viscoelastic deformation.It dissipates the fragment kinetic energy primarily through large deformation,resulting in better penetration resistance.The difference in protective efficacy be-tween these 2 configurations originates from the distinct constraint effects from the material stacking sequence.This constraint effect directly governs the energy distribution mechanisms and the evolution of failure modes within the composite structure.

钟俊泱;张瑞;张钱城;金峰;赵淳铮

西安交通大学 机械结构强度与振动国家重点实验室,西安 710049武汉纺织大学 纺织科学与工程学院,武汉 430200西安交通大学 机械结构强度与振动国家重点实验室,西安 710049西安交通大学 机械结构强度与振动国家重点实验室,西安 710049西安交通大学 机械结构强度与振动国家重点实验室,西安 710049

数理科学

超高分子量聚乙烯复合装甲联合载荷

ultra-high molecular weight polyethylenecomposite armorcombined load

《应用数学和力学》 2026 (8)

1019-1034,16

10.21656/1000-0887.460127

评论