首页|期刊导航|应用数学和力学|全过程下钻速度对地层裂缝宽度影响

全过程下钻速度对地层裂缝宽度影响OA

Effects of Entire Process Tripping-in Speeds on Formation Fracture Widths During the Entire Process

中文摘要英文摘要

下钻速度通过影响井筒有效压力而引起地层裂缝宽度变化,造成井漏隐患.结合下钻井深、钻具组合、地层岩石物理参数、钻井液性能,考虑下钻速度和钻井液可压缩系数等参数,建立了井筒压力瞬变与裂缝变形耦合作用的数学模型.模型采用有限元-有限体积耦合方法进行求解,并利用四川盆地威远区块自 X 井龙马溪组硬脆性页岩地层数据验证了其可靠性.结果表明:① 下钻速度从 0.5 m/s 增加到 2.0 m/s 时,井筒压力从 86.0 MPa 增加到106.6 MPa,裂缝宽度从 0.478 mm 增加到 0.881 mm.② 裂缝宽度随下钻井深、钻柱环空比的增加而增加.下钻速度为0.5 m/s 时,下钻井深从 1 500 m 增加到 5 500 m,裂缝宽度从 0.432 mm 增加到 0.478 mm;钻柱环空比从 0.59 增加到 0.65,裂缝宽度从0.463 mm 增加到0.487 mm.③ 下钻速度从0 增加到1.5 m/s,下钻井深为1 500 m 时,裂缝宽度从 0.4 mm 增加到 0.474 mm;下钻井深增加到 5 500 m 时,裂缝宽度从 0.5 mm 增加到 0.624 mm;裂缝宽度随下钻速度增加而增加,下钻速度超过 1.0 m/s 后,增加趋势更加显著;且随着下钻井深增加,裂缝宽度的增加幅度越大.本研究为优化下钻操作参数提供了理论依据,对预防钻井过程中的井漏事故具有重要指导意义.

The tripping-in speed affects the wellbore effective pressure,leading to changes in formation frac-ture widths and posing a risk of mud loss.The tripping-in speed and drilling fluid compressibility,along with the well depth,the bottom-hole assembly,the formation petrophysical parameters,and the drilling fluid prop-erties were incorporated to build a mathematical model coupling wellbore pressure transients and fracture de-formation.The model was solved with the finite element-finite volume coupling method and validated with data from the hard-brittle shale formation of the Longmaxi formation in the Zi X well of the Weiyuan Block in the Si-chuan Basin.The results show that,i.when the tripping-in speed increase from 0.5 m/s to 2.0 m/s,the well-bore pressure will increase from 86.0 MPa to 106.6 MPa,while the fracture width will rise from 0.478 mm to 0.881 mm.ii.Bigger fracture widths go with greater tripping-in depths and higher drill string annular ratios.At a tripping-in speed of 0.5 m/s,when the tripping depth increases from 1 500 m to 5 500 m,the fracture width will rise from 0.432 mm to 0.478 mm;when the drill string annular ratio increases from 0.59 to 0.65,the fracture width will rise from 0.463 mm to 0.487 mm.iii.As the tripping-in speed increases from 0 to 1.5 m/s,at a trip-ping depth of 1 500 m,the fracture width will rise from 0.4 mm to 0.474 mm;at a tripping depth of 5 500 m,the fracture width will rise from 0.5 mm to 0.624 mm.Bigger fracture widths go with higher tripping-in speeds,and the rising trend will be more pronounced once the tripping-in speed exceeds 1.0 m/s;further,this rise becomes more pronounced with greater tripping depths.This study provides a theoretical basis for optimizing tripping-in operation parameters and offers an important guidance for preventing mud loss incidents during drilling.

赵世贵;孔祥伟;钟森

长江大学 石油工程学院,武汉 430100||油气钻完井技术国家工程研究中心(长江大学),武汉 430100长江大学 石油工程学院,武汉 430100||油气钻完井技术国家工程研究中心(长江大学),武汉 430100重庆渝浮能源发展有限公司,重庆 400000

数理科学

下钻速度裂缝宽度井筒压力流-固耦合

tripping-in speedfracture widthwellbore pressurefluid-solid coupling

《应用数学和力学》 2026 (8)

999-1008,10

"十五五"新型油气勘探开发国家科技重大专项(SQ2025AAA120076)

10.21656/1000-0887.460178

评论