首页|期刊导航|应用数学和力学|基于PSO-LSTM的负Poisson比材料力学性能预测与参数设计

基于PSO-LSTM的负Poisson比材料力学性能预测与参数设计OA

Mechanical Property Prediction and Parameter Design of Auxetic Materials Based on the PSO-LSTM

中文摘要英文摘要

针对负 Poisson 比蜂窝材料力学性能预测与结构优化设计问题,提出一种融合粒子群优化(PSO)算法与长短期记忆(LSTM)网络的机器学习方法.通过有限元仿真构建 400 组包含几何参数(直壁长度、胞元高度、壁厚、胞角)及其对应力学性能(能量吸收、弹性模量、Poisson 比)的训练数据集,结合 PSO 对 LSTM 模型的超参数进行全局优化,建立多目标力学性能预测模型.此外,构建基于 PSO-LSTM 的反向设计框架,通过目标力学性能驱动优化几何参数.实验结果表明:优化后的 PSO-LSTM 模型对能量吸收、弹性模量和 Poisson 比的预测决定系数(R2)分别达到0.983 4,0.974 6 和 0.970 4,均方误差 εms 稳定在0.001 2 以下;反向设计所得模型的总能量吸收、弹性模量与 Pois-son 比的相对误差分别为 0.432%,1.05%和 0.327%.研究成果为负 Poisson 比材料的智能化设计与工程应用提供理论支持.

To address the challenges of mechanical property prediction and structural optimization design for auxetic honeycomb materials,a machine learning approach integrating the particle swarm optimization(PSO)and the long short-term memory(LSTM)networks was proposed.A training dataset consisting of 400 groups of geometric parameters(including straight wall lengths,cell heights,wall thicknesses,and cell angles)and their corresponding mechanical properties(including energy absorption,Young's moduli,and Poisson's ratios)was constructed through finite element simulation.The PSO algorithm was employed to globally optimize the hyperparameters of the LSTM model,to establish a multi-objective mechanical property prediction model.Fur-thermore,an inverse design framework based on the PSO-LSTM was developed,enabling the optimization of geometric parameters driven by target mechanical properties.Experimental results show that,the optimized PSO-LSTM model achieves R2 values of 0.983 4,0.974 6,and 0.970 4 for energy absorption,Young's moduli,and Poisson's ratios,respectively,with mean squared errors(MSE)below 0.001 2.The relative errors of total energy absorption,Young's moduli,and Poisson's ratios for the model obtained through inverse design are 0.432%,1.05%,and 0.327%,respectively.The proposed method provides theoretical support for the intelligent design and engineering application of auxetic materials.

胡雨涵;韩芳;颜芝

武汉科技大学 数学与系统科学学院,武汉 430065武汉科技大学 物理与力学学院,武汉 430065武汉科技大学 物理与力学学院,武汉 430065

通用工业技术

粒子群优化长短期记忆网络负Poisson比材料几何参数设计

particle swarm optimizationlong short-term memory networkauxetic materialgeometric pa-rameter design

《应用数学和力学》 2026 (8)

990-998,9

国家自然科学基金青年基金(51108358)

10.21656/1000-0887.460118

评论