困难地区CGCS2000坐标的高精度自主解算方法应用OA
Application of a High-precision Autonomous Solution Method for CGCS2000 Coordinates in Difficult Areas
针对网络信号缺失及CORS服务覆盖不足地区难以直接获取CGCS2000坐标的问题,提出一种基于国际IGS跟踪站联测的高精度自主解算方法.通过同步采集测区 GNSS 观测数据,联合下载同期 IGS 跟踪站数据,利用 GAMIT/GLOBK 软件进行高精度基线解算,并借助 ITRF 框架与历元转换模型将结果统一至 ITRF97 框架 2000.0 历元,最终经网平差获得测区目标的 CGCS2000 坐标.以某水利工程控制网建设为例进行验证,结果表明:该方法所得坐标与传统控制测量方法成果的平面位置较差不超过 1.3 cm,满足高等级工程测量精度要求.该方法可在无网络、无 CORS 服务的偏远地区,实现CGCS2000坐标获取,具有较强的实用价值.
In response to the difficulty of directly obtaining CGCS2000 coordinates in areas lacking network signals and with insufficient CORS coverage,this paper proposes a high-precision autonomous solution method based on joint observation with international IGS tracking stations.GNSS observation data in the survey area are simultaneously collected,and contemporaneous observation data from IGS tracking stations are downloaded.The high-precision baseline processing is then performed using GAMIT/GLOBK software.The results are then transformed to the ITRF97 framework at epoch 2000.0 through ITRF frame transformation and epoch transformation models,and finally,the CGCS2000 coordinates of the survey area targets are obtained through network adjustment.Validation using a water conservancy project control network construction as an example shows that the plane position discrepancies between the coordinates obtained by this method and those from traditional control survey methods are no more than 1.3 centimeters,meeting the accuracy requirements of high-grade engineering surveys.This method enables the acquisition of CGCS2000 coordinates in remote areas without network or CORS services,with strong practical value.
马国瑞;于龙昊;董亚涵
中水北方勘测设计研究有限责任公司,天津 300222中水北方勘测设计研究有限责任公司,天津 300222中水北方勘测设计研究有限责任公司,天津 300222
信息技术与安全科学
困难地区CGCS2000IGS站联测ITRF框架转换GNSS数据处理
difficult areaCGCS2000IGS station joint observationITRF framework transformationGNSS data processing
《现代信息科技》 2026 (16)
133-136,143,5
评论