基于AHP-熵权法结合Box-Behnken响应面法的金银花蒲公英丹参颗粒成型工艺优化研究OA
Optimization of Honeysuckle,Dandelion,and Danshen Granule Forming Process Based on AHP Entropy Weight Method Combined with Box-Behn-ken Response Surface Methodology
为优化金银花蒲公英丹参颗粒的成型工艺.本研究基于单因素试验,采用Plackett-Burman设计筛选关键参数;以成型率、吸湿率、休止角为指标,利用AHP-熵权法确定组合权重,结合Box-Behnken响应面法优化工艺并验证.确定糊精为最佳稀释剂,辅药比、乙醇浓度及用量为关键参数.三者组合权重分别为0.472、0.346、0.182.最优工艺为:糊精-干膏粉比1.07∶1,乙醇浓度94%,乙醇用量40.7%,PVP-K30浓度3%,50 ℃干燥420 min.验证试验综合评分均值99.20,RSD<2%.该工艺稳定可行,可为工业化生产提供依据.
To optimize the molding process of honeysuckle,dandelion,and Danshen granules.Based on single factor experiments in this study,Plackett Burman design to screen key parameters;using the molding rate,moisture absorption rate,and angle of repose as indicators,the combination weight were determined by the AHP entropy weight method,and the process was optimized and verified using the Box Be-hnken response surface method.Diluent was determined as the optimal dextrin,and the key parameters were the ratio of dextrin to dry extract powder,ethanol concentration,and ethanol dosage.The combined weights of the three are 0.472,0.346,and 0.182,respectively.The optimal process is:dextrin dry paste powder ratio of 1.07∶1,ethanol concentration of 94%,ethanol dosage of 40.7%,PVP-K30 concentration of 3%,and drying at 50℃ for 420 minutes.The average comprehensive score of the verification experiment was 99.20,with RSD<2%.This pro-cess is stable and feasible,and can provide a basis for industrial production.
戴莎莎;苏怀雨;孙健伟;陈琳;吕姝寰;吕欣澳;李海燕
吉林大学药学院,吉林 长春 130112吉林大学药学院,吉林 长春 130112吉林大学药学院,吉林 长春 130112吉林大学药学院,吉林 长春 130112吉林大学药学院,吉林 长春 130112吉林大学药学院,吉林 长春 130112长春中医药大学附属医院,吉林 长春 130021
医药卫生
金银花蒲公英丹参颗粒剂AHP-熵权法响应面设计成型工艺
Lonicerae japonicaeTaraxacum mongolicumSalviae miltiorrhizaegranulesAHP-entropy weight methodresponse surface methodologymolding process
《特产研究》 2026 (4)
51-58,64,9
吉林省科技厅科技发展计划项目(20260301030YY)
评论