首页|期刊导航|太阳能|基于有限元法的BIPV组件结构设计与力学仿真分析

基于有限元法的BIPV组件结构设计与力学仿真分析OA

STRUCTURAL DESIGN AND MECHANICAL SIMULATION ANALYSIS OF BIPV MODULE BASED ON FEM

中文摘要英文摘要

采用有限元法(FEM)对光伏建筑一体化(BIPV)组件进行了力学模拟分析.首先对传统BIPV 组件建立了力学模型,基于该力学模型,对其在标准加载条件和屋顶不同上人工况下的力学特性进行了模拟,并通过优化传统BIPV 组件结构,得到光伏瓦,对其在特定工况下的力学性能进行了分析.分析结果表明:1)在屋顶2种上人工况下,传统BIPV组件的最大位移均超过了0.96 mm,说明这2种工况下传统BIPV组件均被损坏.2)在2个人同时上屋顶的工况下,相较于传统BIPV组件,光伏瓦的位移更小,这主要归因于其玻璃厚度更大、光伏组件宽度更窄的设计特点.这种结构使光伏瓦产生的弯曲力矩更小,从而在力学性能上实现了更高的安全冗余.

This paper uses finite element method(FEM)to conduct mechanical simulation analysis on PV building integrated(BIPV)modules.Firstly,a mechanical model is established for traditional BIPV modules.Based on this model,the mechanical characteristics are simulated under standard loading conditions and different working conditions for people on the roof.By optimizing the structure of traditional BIPV modules,PV tiles are obtained and their mechanical performance under specific working conditions is analyzed.The analysis results show that:1)Under the 2 working conditions for people on the roof,the maximum displacement of traditional BIPV modules exceeds 0.96 mm,indicating that traditional BIPV modules are damaged under both working conditions.2)Under the condition of 2 people on the roof at the same time,compared to traditional BIPV module,the displacement of PV tile is smaller,mainly due to its design features of thicker glass and narrower width of PV module.This structure reduces the bending moment generated by the PV tile,thereby achieving higher safety redundancy in mechanical performance.

周颖;刘云;赵东明;蔡礼雄;陈传科;宋艳梅

中国华能集团清洁能源技术研究院有限公司,北京 102209中国华能集团清洁能源技术研究院有限公司,北京 102209中国华能集团清洁能源技术研究院有限公司,北京 102209武汉理工大学,武汉 430081中国华能集团清洁能源技术研究院有限公司,北京 102209中国华能集团清洁能源技术研究院有限公司,北京 102209

信息技术与安全科学

有限元法光伏建筑一体化光伏建筑一体化组件机械荷载光伏瓦模拟仿真力学分析

FEMBIPVBIPV modulesmechanical loadsPV tilesimulationmechanical analysis

《太阳能》 2026 (8)

51-60,10

"面向智能光伏的组件回收技术标准、碳足迹核算验证与成果产业化公共服务平台"项目(2022-227-218)

10.19911/j.1003-0417.tyn20250627.01

评论