首页|期刊导航|市政技术|曝气催化铁刨花释铁能力探究

曝气催化铁刨花释铁能力探究OA

Study on the Iron Release Capacity of Aerated Catalytic Iron Shavings

中文摘要英文摘要

开展了曝气催化铁刨花释铁能力及影响因素研究,对停留时间、铁刨花堆积密度、铜刨花添加和铁铜比例、钢材种类以及减缓释铁过程钝化等对释铁能力的影响进行探究.选择停留时间为30 min和60 min、铁刨花堆积密度为30 g/L和60 g/L开展对比实验,筛选出最佳停留时间60 min、铁刨花堆积密度为30 g/L时,释铁最高质量浓度为9.7 mg/L.在此基础上研究铜刨花添加和铁铜比例以及钢材种类等对释铁能力的影响,研究结果表明,在曝气条件下,Q235-B钢材单独铁刨花体系释铁能力要高于铁刨花和铜刨花催化铁体系,钢材种类对铁刨花释铁能力的影响更为显著.释铁过程中,铁刨花表面会发生钝化,影响释铁能力,对采用机械搅拌和酸洗方式去除铁刨花表面附着物的能力进行实验对比探究,结果表明机械搅拌铁刨花可维持铁刨花释铁能力.

This study investigated the iron release ability of aerated catalytic iron shavings and its influencing factors.The effects of residence time,bulk density of iron shavings,addition of copper shavings and ratio of iron to copper,types of steel and passivation in the process of reducing iron release on iron-releasing capacity were investigated.The comparison experiment was carried out,and the residence time were 30 min and 60 min,and the packing den-sity of iron shavings were 30 g/L and 60 g/L.When the optimal residence time was 60 min and the packing density of iron shavings was 30 g/L,the highest concentration of iron releasing was 9.7 mg/L.On this basis,the effects of cop-per shavings addition,iron-copper ratio and steel types on iron-releasing capacity were studied.The results showed that under aeration conditions,the iron-releasing ability of iron shavings system of Q235-B steel alone was higher than that of iron shavings and copper shavings catalyzed iron system.And the effect of steel type on iron-releasing capacity was more significant.In the process of iron release,the surface of iron shavings will be passivated,which will affect the ability of iron release.The ability of mechanical stirring and pickling to remove the adhesion on the surface of iron shavings was compared and investigated to show that the iron release ability of iron shavings can be maintained by mechanical stirring.

张红;刘仁林;赵志刚

安徽中节能国祯智能装备有限公司,安徽 合肥 230088安徽中节能国祯智能装备有限公司,安徽 合肥 230088安徽中节能国祯智能装备有限公司,安徽 合肥 230088

资源环境

铁刨花催化铁释铁能力机械搅拌酸洗

iron shavingscatalytic ironiron-releasing capacitymechanical mixingpickling

《市政技术》 2026 (8)

252-258,7

10.19922/j.1009-7767.2026.08.252

评论