首页|期刊导航|四川水力发电|水工隧洞混凝土衬砌外观质量缺陷分析与对策

水工隧洞混凝土衬砌外观质量缺陷分析与对策OA

Analysis and countermeasures of appearance quality defects in concrete lining of hydraulic tunnels

中文摘要英文摘要

大断面水工隧洞采用针梁钢模台车全断面浇筑时,常因设备局限与工艺控制不当导致外观缺陷,如出现麻面、气泡、翻砂等外观质量缺陷,此类问题不仅影响工程外观观感,也威胁工程耐久性与结构安全.文章依托针梁钢模台车全断面混凝土浇筑工艺,深入剖析各类外观质量缺陷的形成原因,针对性提出质量控制要点与缺陷处理对策,为同类水工隧洞二次衬砌混凝土的质量管理工作提供实践经验与技术借鉴.

When large cross-section hydraulic tunnels are constructed using needle-beam steel formwork jockeys for full-section pouring,appearance defects such as pitting,bubbles,and sanding often arise due to equipment limitations and improper process control.These defects not only affect the visual quality of the project but also threaten its durability and structural safety.Based on the full-section concrete pouring process with needle-beam steel formwork jockeys,this paper thoroughly analyzes the causes of various appearance quality defects,proposes targeted quality control measures and defect remediation strategies,which provides practical experi-ence and technical insights for quality management in secondary lining concrete of similar hydraulic tunnels.

丁双;李凯;李联书;苏延鹏;李治燚

中国安能集团第三工程局有限公司,四川 成都 611130中国安能集团第三工程局有限公司,四川 成都 611130四川华能泸定水电有限公司,四川 泸定 626100四川华能泸定水电有限公司,四川 泸定 626100中国安能集团第三工程局有限公司,四川 成都 611130

建筑与水利

引水隧洞衬砌混凝土质量缺陷成因分析处理措施

headrace tunnellining concretequality defectscause analysistreatment measures

《四川水力发电》 2026 (4)

25-29,5

10.20196/j.cnki.scslfd.20260406

评论