首页|期刊导航|四川水力发电|斐济热带雨林地区填筑施工技术研究

斐济热带雨林地区填筑施工技术研究OA

Research on filling construction technology in the tropical rainforest region of Fiji

中文摘要英文摘要

斐济热带雨林地区高强度降雨与优质填筑材料匮乏的叠加效应,严重制约了当地基础设施建设.为解决此难题,针对斐济供水工程及威拉管道工程,系统开展了本地化填筑材料的遴选与施工工艺创新研究.通过对比市场现有材料,创新性地提出将本地易得的皂石(Soapstone)作为管沟及道路路床的回填材料;采用动力触探(DCP)检测法精准控制地基处理深度,并结合现场试验确定斐济常见材料的施工工艺及最佳施工参数.工程实践表明:皂石填筑体稳定性好,能有效控制工后沉降,其性能优于一般土方且受降雨影响更小.该技术最终使施工效率提升约 30%,成本较级配碎石(AP65)降低约 88%,成功解决了多雨环境下填筑施工的质量与成本控制问题,为类似地区提供了可靠的技术参考与实践范例.

To address the engineering challenges of intense rainfall and shortage of construction materials in the Tropical Rainforest Region of Fiji,a study on the adaptability of local backfill materials was carried out based on the Fiji Water Supply Project and the Waila Pipeline Project.By comparing existing available local materi-als,an innovative proposal was made to use locally available soapstone as backfill for pipeline trenches and road subgrades.The dynamic cone penetration(DCP)testing method was employed to accurately control the depth of foundation treatment,while field tests were conducted to determine the construction techniques and optimal parameters for common materials in Fiji.Engineering practice has demonstrated that soapstone fill exhibits ex-cellent stability,effectively controls post-construction settlement,and outperforms conventional earth fills with less sensitivity to rainfall.This technology ultimately improved construction efficiency by approximately 30%and reduced costs by about 88%compared to graded crushed stone(AP65),successfully resolving quality and cost control issues in fill construction under high-rainfall conditions.It provides a reliable technical refer-ence and practical example for similar regions.

韦新宇

中国水利水电第十工程局有限公司,四川 成都 610036

交通工程

热带雨林填筑材料遴选皂石填筑工艺

rainforest regionbackfillselectSoapstonefilling construction technology

《四川水力发电》 2026 (z1)

151-155,160,6

10.20196/j.cnki.scslfd.2026S131

评论