首页|期刊导航|煤气与热力|燃气切断阀两级密封结构的研究

燃气切断阀两级密封结构的研究OA

Research on Two-Stage Sealing Structure of Gas Shut-Off Valves

中文摘要英文摘要

针对采用单级密封阀垫的切断阀在大口径、大压差的工况下,切断后人工复位困难的问题,提出一种切断阀垫两级密封结构设计方案.对给定案例,理论计算得出:单级密封、两级密封人工复位所需的最小拉力分别为404、47 N,两级密封所需的最小拉力远小于单级密封;试验结果得出:两级密封切断阀人工复位所需拉力的平均值约为单级密封切断阀的1/8.采用两级密封阀垫的切断阀可以有效解决人工复位困难的问题.

To address the challenge of high manual reset force following shut-off in large-diameter,high-pressure-difference applications-particularly for shut-off valves equipped with single-stage sealing gaskets,a novel two-stage sealing gasket structure is proposed.Theoretical analysis of a representative case reveals that the minimum pulling forces required for manual reset are 404 N for single-stage sealing and 47 N for two-stage sealing respectively;the minimum force required for two-stage sealing is much lower than that for single-stage sealing.Experimental results show that the average pulling force required for manual reset of the two-stage sealing shut-off valve is approximately 1/8 of that of the single-stage sealing valve.The shut-off valve adopting a two-stage sealing gasket can effec-tively mitigate the manual reset difficulty inherent in conventional single-stage designs.

刘洋;周士钧;陈叶;张英;王国庆

上海飞奥燃气设备有限公司,上海 201201上海飞奥燃气设备有限公司,上海 201201上海飞奥燃气设备有限公司,上海 201201上海飞奥燃气设备有限公司,上海 201201上海飞奥燃气设备有限公司,上海 201201

建筑与水利

燃气切断阀阀垫单级密封两级密封

gas shut-off valvevalve gasketsingle-stage sealingtwo-stage sealing

《煤气与热力》 2026 (8)

61-64,4

评论