首页|期刊导航|空间电子技术|MAX相及MXene的空间电子应用潜力

MAX相及MXene的空间电子应用潜力OA

Potential of MAX phases and MXene for space electronics applications

中文摘要英文摘要

MAX相及衍生的二维 MXene凭借其层状结构、可调的表面化学性质以及优异的导电性,成为空间储能、电磁吸收与屏蔽和电子互联领域的候选材料.本文综述了该类材料的结构特性、制备方法及在上述三大方向的研究进展.首先,分析了 MAX相的六方层状结构与 MXene表面官能团对离子扩散势垒和电导率的调控机制.其次,总结了自上而下与自下而上制备技术的突破.最后,重点阐述了三大应用方向的关键性能:在空间储能中,Ti3C2Ox锂金属负极在0.5 mA/cm2 下循环超1 600 h,碱化 Ti3C2 纳米带在钠/钾离子电池中循环 500次后容量保持约 50 mAh/g,锌离子混合超级电容器在-40 ℃下面积电容为 64.0 mF/cm2;在电磁屏蔽与吸收中,超晶格结构反射损耗-56.3 dB(1.5 mm),有效吸收带宽覆盖整个Ku波段,高熵MAX相Ti2(Al1/5Sn1/5In1/5Bi1/5Ag1/5)C实现-71.6 dB的最小反射损耗;在电子互联方面,MXene涂层3D打印波导管传输效率93%、重量为铝制品的1/8.MAX相及MXene通过结构设计与制备工艺创新,已成为下一代空间电子技术最具潜力的材料体系.

MAX phases and their two-dimensional MXenes,which have layered structures,adjustable surface chemistry,and high electrical conductivity,have become promising materials for energy storage in space,absorbing and shielding electromagnetic waves,and connecting electronic devices.This review summarizes the structural properties,synthesis techniques,and recent advancements in research on these materials in the aforementioned three areas.To begin with,this paper analyzes the hexagonal layered structure of MAX phases and how the surface functional groups of MXenes control ion diffusion barriers and electrical conductivity.Then,recent advances in top-down and bottom-up preparation methods are summarized.Lastly,the key performance metrics of these three application directions are elaborated,as detailed below:In spatial energy storage,the Ti3C2Ox lithium metal anode works for over 1 600 hours at 0.5 mA/cm2;alkalized Ti3C2 nanoribbon retained a capacity of approximately 50 mAh/g after 500 cycles in sodium/potassium-ion batteries;and zinc-ion hybrid supercapacitor exhibited a areal capacitance of 64.0 mF/cm2 at-40℃.In electromagnetic shielding and absorption,the superlattice structure has a reflection loss of-56.3 dB at a matching thickness of 1.5 mm with an effective absorption bandwidth covering the entire Ku band;the high-entropy MAX phase Ti2(Al1/5Sn1/5In1/5Bi1/5Ag1/5)C achieves a minimum reflection loss of-71.6 dB.In terms of electronic interconnects,a 3D-printed polymer waveguide covered in MXene can send signals with 93%efficiency and only weighs one-eighth as much as aluminum products.Through structural design and preparation process innovations,MAX phases and MXenes have become one of the most promising material systems for next-generation space electronics.

蒋晓菲;梁艺涵;宾诚文;姜曼;冯庆国;胡春峰

西南交通大学 材料科学与工程学院,材料先进技术教育部重点实验室,成都 610031西南交通大学 材料科学与工程学院,材料先进技术教育部重点实验室,成都 610031西南交通大学 集成电路学院,成都 611756西南交通大学 化学学院,成都 610031西南交通大学 材料科学与工程学院,材料先进技术教育部重点实验室,成都 610031西南交通大学 材料科学与工程学院,材料先进技术教育部重点实验室,成都 610031

航空航天

MAX相MXene制备空间电子应用潜力

MAX phaseMXenesynthesisspace electronics application potentials

《空间电子技术》 2026 (4)

46-62,17

国家自然科学基金项目(编号:52472079)四川省科技计划项目(编号:2025YFHZ0082)

10.3969/j.issn.1674-7135.2026.04.004

评论