基于自适应动态粒子群优化算法的多自由度机械臂高效能运动轨迹优化OA
Efficient motion trajectory optimization of multi-degree-of-freedom robotic arm based on adaptive dynamic particle swarm optimization algorithm
针对多自由度液压机械臂作业过程中运动效率低、运行时间长及稳定性差等问题,提出了一种基于自适应动态粒子群优化算法,对多自由度机械臂运动轨迹进行优化.首先,对多自由度机械臂作业运动学进行分析,并建立五次B样条曲线对机械臂运动轨迹进行拟合;然后,以多自由度机械臂运动时间为优化目标,设计自适应动态粒子群优化算法,对五次B样条曲线构建的运动轨迹进行优化;最后,分别采用标准粒子群优化算法、改进粒子群优化算法和所提算法对机械臂运动轨迹进行优化.仿真结果表明,采用所提算法所得机械臂运动时间为22.61 s,与其余2种算法运动效率相比分别提高了 39.2%和26.1%,且所得运动轨迹连续平滑,验证了所提算法用于多自由度机械臂运动轨迹优化的有效性,能够实现多自由度机械臂高效能运动.
To address the issues of low motion efficiency,long operation time and poor stability during the operation of multi-de-gree-of-freedom hydraulic mechanical arms,an Adaptive Dynamic Particle Swarm Optimization(ADPSO)algorithm was proposed to optimize the motion trajectory of the mechanical arms.Firstly,the kinematics of the mechanical arm operation was analyzed,and a five-time B-spline curve was established to fit the motion trajectory of the mechanical arm;then,with the mechanical arm operation time as the optimization objective,an adaptive dynamic particle swarm optimization algorithm was designed to optimize the motion trajectory constructed by the five-time B-spline curve;finally,the standard particle swarm optimization algorithm,the improved particle swarm optimization algorithm and the algorithm proposed were used to optimize the motion trajectory of the me-chanical arm respectively.The simulation results show that the motion time of the mechanical arm obtained by the algorithm pro-posed was 22.61 s,which is improved by 39.2%and 26.1%compared with the other two algorithms respectively,and the motion trajectory was continuous and smooth,verifying the effectiveness of the algorithm proposed for the motion trajectory optimization of multi-degree-of-freedom mechanical arms,and enabling efficient movement of multi-degree-of-freedom mechanical arms.
辛少宇;李淑君;王彩红
广东省轻工业技师学院,广州 510315太原科技大学,太原 030024广东省轻工业技师学院,广州 510315
信息技术与安全科学
轨迹优化时间最优粒子群优化算法动态调整
trajectory optimizationtime optimizationparticle swarm optimization algorithmdynamic adjustment
《现代制造工程》 2026 (8)
68-74,7
广东省技工教育和职业培训省级教学研究课题项目(KT2017004)
评论