首页|期刊导航|机器人外科学杂志(中英文)|3D打印高仿真教学模型在胸腰椎骨折规范化诊疗培训中的应用

3D打印高仿真教学模型在胸腰椎骨折规范化诊疗培训中的应用OA

Application of 3D-printed high-fidelity teaching models in standardized diagnosis and treatment training for thoracolumbar fractures

中文摘要英文摘要

目的:制作胸腰椎骨折 3D 打印高仿真教学模型,探讨其在骨科临床规范化培训中的应用效果.方法:采用前瞻性非随机对照试验.纳入 2025 年 9 月—2026 年 4 月于空军军医大学唐都医院骨科轮转的 80 名住院医师规范化培训学员,按入科时间分为对照组(2025 年 9-12 月,n=40)与观察组(2026 年 1-4 月,n=40).对照组采用传统教学,观察组采用 3D打印高仿真教学模型进行理论授课、骨折分型识别及椎弓根螺钉置入模拟训练.两组教学时长均为6 学时.比较两组理论知识考核成绩、实践操作技能[全局评分量表(GRS)、置钉时间、置钉准确率]、教学满意度及自我效能感(GSES 评分).结果:教学前,两组理论成绩与自我效能感差异无统计学意义(P>0.05);教学后,观察组在理论成绩(即时与4周随访)、操作技能、教学满意度及GSES评分方面均显著优于对照组(P<0.05).结论:3D打印高仿真教学模型有助于提升规培学员的理论水平、置钉技能与自我效能,可作为传统教学方式的有益补充,但其结论源于单中心、小样本的非随机对照研究,推广价值尚需更大规模教学实践验证.

Objective:To construct a 3D-printed high-fidelity teaching model for thoracolumbar fracture and evaluate its application efficacy in standardized clinical training for orthopedic residents.Methods:A prospective non-randomized controlled trial was conducted.80 standardized residency trainees who completed their orthopedic rotation at Tangdu Hospital from September 2025 to April 2026 were selected.They were divided into the control group(n=40,enrolled September-December 2025)and the observation group(n=40,enrolled January-April 2026)by enrollment time.The control group received conventional teaching,while the observation group received theoretical instruction,thoracolumbar fracture classification training,and pedicle screw placement simulation training using 3D-printed high-fidelity teaching models.Both groups had a 6-hour curriculum.Theoretical knowledge scores,practical skills[global rating scale(GRS),screw insertion time,screw insertion accuracy],teaching satisfaction,and general self-efficacy scale(GSES)score were compared between the two groups.Results:There were no significant differences in theoretical scores or GSES scores between the two groups before teaching(P>0.05).After teaching,the observation group showed significantly higher scores in theoretical knowledge(immediate and 4-week follow-up),practical skills teaching satisfaction,and GSES compared to the control group(P<0.05).Conclusion:The 3D-printed high-fidelity teaching model can help to improve the theoretical knowledge,pedicle screw placement skills,and self-efficacy of residents undergoing standardized training,thus can serve as a valuable supplement to conventional teaching methods.However,given the single-center,small-sample,non-randomized design,its generalizability requires further validation through larger-scale teaching practice.

赵健;徐斌;董鑫;廖博;董瑞;黄博

空军军医大学唐都医院 骨科 陕西 西安 710038空军军医大学唐都医院 骨科 陕西 西安 710038空军军医大学唐都医院 骨科 陕西 西安 710038空军军医大学唐都医院 骨科 陕西 西安 710038空军军医大学唐都医院 普通外科 陕西 西安 710038空军军医大学唐都医院 普通外科 陕西 西安 710038

医药卫生

3D打印高仿真教学模型胸腰椎骨折临床规范化培训

3D PrintingHigh-fidelity Teaching ModelThoracolumbar FracturesStandardized Clinical Training

《机器人外科学杂志(中英文)》 2026 (8)

1500-1504,5

国家自然科学基金青年科学基金项目(82405089)空军军医大学教学研究重点课题(2024ZD05) National Natural Science Foundation of China Youth Fund Project(82405089)Key Teaching and Research Project of Air Force Medical University(2024ZD05)

10.12180/j.issn.2096-7721.2026.08.029

评论