考虑刀具磨损的精密零件铣削工艺参数优化OA
Optimization of milling process parameters for precision parts considering tool wear
在金属切削加工过程中,刀具磨损直接影响加工精度与效率,对铣削加工过程中的工艺参数进行动态优化至关重要.针对该问题,提出了一种考虑刀具磨损的精密零件铣削工艺参数优化方法.首先,利用正交实验分析主轴转速、每齿进给量和切削深度对刀具磨损的影响规律;然后,以刀具耐用度、材料去除率为优化目标,通过遗传算法(Genetic Al-gorithm,GA)对工艺参数进行优化;最后,通过精密零件铣削实验验证了所提方法的有效性,实验结果表明,材料去除率提升了 21%,每加工 7 000 mm,刀具磨损下降了 17.49μm,刀具耐用度提升了 21.4%,优化效果显著.
During the metal cutting process,tool wear directly affects machining accuracy and efficiency,and is crucial for the dy-namic optimization of process parameters in milling operations.To address this issue,a method for optimizing milling process pa-rameters of precision parts considering tool wear was proposed.Firstly,orthogonal experiments were conducted to analyze the in-fluence laws of spindle speed,feed per tooth,and cutting depth on tool wear.Secondly,with tool life,material removal rate as opti-mization objectives,the process parameters were optimized using a genetic algorithm.Finally,the effectiveness of the proposed method was verified through milling experiments on precision parts.The experimental results show that the material removal rate was increased by 21%,tool wear was reduced by 17.49 μm per 7 000 mm,and tool life was improved by 21.4%,demonstrating significant optimization effects.
杨向东;邵京伟;张彬;刘涛
广州华立学院智能制造学院机械系,广州 511325湖南工业大学机械工程学院,株洲 412007广州华立学院智能制造学院机械系,广州 511325湖南工业大学机械工程学院,株洲 412007
矿业与冶金
刀具磨损铣削加工工艺参数优化遗传算法
tool wearmillingprocess parameter optimizationGenetic Algorithm(GA)
《现代制造工程》 2026 (8)
1-7,42,8
国家自然科学基金项目(52305465)广东省普通高校重点领域专项项目(2023ZDZX3051,2023ZDZX3050)广东省普通高校工程技术中心项目(2023GCZX008)湖南省工信厅2023年度湖南省制造业关键产品"揭榜挂帅"项目(2023GXGG019)
评论