首页|期刊导航|华侨大学学报(自然科学版)|压电驱动器迟滞非线性误差的多项式拟合修正方法

压电驱动器迟滞非线性误差的多项式拟合修正方法OA

Polynomial Fitting Correction Method for Hysteresis Nonlinearity Errors in Piezoelectric Actuators

中文摘要英文摘要

针对压电驱动器迟滞非线性导致的定位精度下降问题,提出一种基于多项式拟合的迟滞修正方法.通过实验获取迟滞曲线的特性数据,建立驱动电压-位移映射关系,采用最小二乘拟合构建修正函数,并基于运算放大电路与单片机实现前馈补偿,无需复杂程序支持.结果表明:文中方法将最大迟滞误差从 12.25%降至 0.88%,重复性误差小于 1.66%,可有效提升系统响应速度与控制精度,为压电驱动器的高精密实时控制提供了可行方案.

To address the issue of reduced positioning accuracy caused by hysteresis nonlinearity in piezoelec-tric actuators,a hysteresis correction method based on polynomial fitting is proposed.By experimentally obtai-ning characteristic hysteresis curve data,a drive voltage-displacement mapping relationship is established,a correction function is then constructed using least squares fitting,and feedforward compensation is implemen-ted through operational amplifier circuits and microcontrollers,without requiring complex programming.The experimental results demonstrate that the proposed method reduces the maximum hysteresis error from 12.25%to 0.88%,with repeatability error maintained below 1.66%.Moreover,the approach effectively en-hances the system response speed and control accuracy,providing a feasible solution for high-precision real-time control of piezoelectric actuators.

金花雪;陈小雅;许童童;张善勤;薛祎鹏;华鑫杰

华侨大学 机电及自动化学院,福建 厦门,361021华侨大学 机电及自动化学院,福建 厦门,361021华侨大学 机电及自动化学院,福建 厦门,361021华侨大学 机电及自动化学院,福建 厦门,361021华侨大学 机电及自动化学院,福建 厦门,361021华侨大学 机电及自动化学院,福建 厦门,361021

信息技术与安全科学

压电驱动器迟滞非线性规律多项式拟合控制算法迟滞误差

piezoelectric actuatorhysteresis nonliner lawpolynomial fittingcontrol algorithmhysteresis error

《华侨大学学报(自然科学版)》 2026 (5)

518-523,6

国家自然科学基金资助项目(52275530)华侨大学教育教学改革研究项目(HQJGTML2505、HQJGTML2507、HQJGTML2508)

10.11830/ISSN.1000-5013.202507019

评论