首页|期刊导航|电焊机|时效工艺对SLM超高强钢微观组织与力学性能的影响

时效工艺对SLM超高强钢微观组织与力学性能的影响OA

Influence of Aging Treatment on Microstructure and Mechanical Proper-ties of SLMed Ultra-high Strength Steel

中文摘要英文摘要

为探究时效温度与保温时间对选区激光熔化(SLM)超高强钢在不同时效工艺下的微观组织演变及力学性能变化,对SLM超高强钢进行低温长时效(480℃×8 h)和高温短时效(530℃×3 h)处理,结合X射线衍射(XRD)、电子背散射衍射(EBSD)及透射电子显微镜(TEM)分析,揭示了逆转变奥氏体及纳米析出相(η-Ni3Ti和Laves-Fe2Mo)的形成机制.结果表明,低温长时效工艺促进了高密度针状η-Ni3Ti单相弥散析出,维持了高位错密度,从而实现2 400 MPa级的超高强度.高温短时效工艺则导致η-Ni3Ti相粗化并伴随Laves-Fe2Mo相双相析出,沉淀强化效果下降,强度显著降低但塑性有所提升.本研究为SLM超高强钢的时效工艺优化及性能调控提供了理论依据.

This study systematically investigated the microstructural evolution and mechanical property variations of selec-tive laser melting(SLM)ultra-high strength steel(UHSS)subjected to different aging treatments.Through low-temperature long-duration aging(480℃×8 h)and high-temperature short-duration aging(530℃×3 h),combined with X-ray diffraction(XRD),electron backscatter diffraction(EBSD),and transmission electron microscopy(TEM)characterization,the forma-tion mechanisms of reverted austenite and nano-scale precipitates(η-Ni3Ti and Laves-Fe2Mo)were elucidated.The results demonstrate that the low-temperature long-duration aging treatment promoted the homogeneous dispersion of high-density needle-like η-Ni3Ti single-phase precipitates while maintaining a high dislocation density,thereby achieving an ultra-high strength of 2400 MPa.In contrast,the high-temperature short-duration aging treatment induced the coarsening of η-Ni3Ti precipitates accompanied by the dual-phase precipitation of Laves-Fe2Mo,leading to a diminished precipitation strengthen-ing effect with significantly reduced strength but enhanced ductility.This study provides a theoretical basis for the optimiza-tion of aging protocols and performance tailoring of SLM-processed ultra-high-strength steels.

王帅;王长军;姜风春;董超;苗森淼;褚韦涵;果春焕

哈尔滨工程大学 烟台研究(生)院,山东 烟台 264000||钢铁研究总院有限公司特殊钢研究院,北京 100081||哈尔滨工程大学 材料科学与化学工程学院,黑龙江 哈尔滨 150001||天津重型装备工程研究有限公司,天津 300457钢铁研究总院有限公司特殊钢研究院,北京 100081哈尔滨工程大学 烟台研究(生)院,山东 烟台 264000哈尔滨工程大学 科学技术研究院,黑龙江 哈尔滨 150001钢铁研究总院有限公司特殊钢研究院,北京 100081钢铁研究总院有限公司特殊钢研究院,北京 100081哈尔滨工程大学 材料科学与化学工程学院,黑龙江 哈尔滨 150001

矿业与冶金

选区激光熔化超高强钢时效工艺微观组织力学性能

selective laser meltingultra-high-strength steelaging treatmentmicrostructuremechanical properties

《电焊机》 2026 (8)

41-48,8

黑龙江省重点研发计划(2024ZXDXB01)

10.7512/j.issn.1001-2303.2026.08.04

评论