首页|期刊导航|集成电路与嵌入式系统|一种基于FPGA多重启动的配置Flash刷新方法

一种基于FPGA多重启动的配置Flash刷新方法OA

A method for configuration Flash refresh based on FPGA multiboot

中文摘要英文摘要

对于长寿命产品,NOR Flash 内存储的 FPGA 比特流会因 Flash 浮栅电荷泄漏而发生数据位翻转,进而导致FPGA 配置失败.针对该问题,提出了一种基于 FPGA 多重启动的 Flash 刷新方法,产品年检时对 Flash 进行刷新,以恢复浮栅电荷量.对 Kintex-7 系列 FPGA 多重启动机制进行了研究,优化设计了配置数据组成,提高了多重启动的鲁棒性.优化后的配置数据包含 1 份同步头文件、2 份相同的比特流、3 份相同辅助文件.启动刷新后,FPGA 按自检、刷新、回读校验流程对 Flash 进行刷新.测试结果表明,该刷新方法稳定可靠,具有较高的工程应用价值.

For long-life products,the FPGA bitstream stored in NOR Flash may experience bit flips due to floating-gate charge leakage,which leads to FPGA configuration failure.To address this issue,this paper proposes a Flash refresh method based on FPGA multi-boot.The Flash is refreshed during annual product maintenance to restore the floating-gate charge.The multiboot of the Kintex-7 series FPGA was investigated,and the configuration data composition was restructured to enhance the robustness of configuration.The opti-mized configuration data comprises one header file,two identical copies of the bitstream,and three identical sets of auxiliary file.When launching the Flash refresh,FPGA executes a sequence of steps including self-check,data refresh,and read-back verification to ensure the reliability of the process.The test results have verified that this refresh method is stable and reliable,exhibiting high practical engi-neering utility.

李全良;王超;王瑞琳;焦扬;乔川

北京控制工程研究所,北京 100094北京控制工程研究所,北京 100094北京控制工程研究所,北京 100094北京控制工程研究所,北京 100094北京控制工程研究所,北京 100094

信息技术与安全科学

Flash刷新FPGA比特流位翻转多重启动

Flash refreshFPGAbitstreambit flipmultiboot

《集成电路与嵌入式系统》 2026 (9)

37-44,8

10.20193/j.ices2097-4191.2026.0011

评论