首页|期刊导航|现代农业装备|金枪鱼切片装置设计以及模拟验证

金枪鱼切片装置设计以及模拟验证OA

Fully Automatic Tuna Slicing Device and Simulation Verification

中文摘要英文摘要

为了有效降低金枪鱼生鱼片在加工过程中的生产成本,显著提升切片效率,并满足金枪鱼生食加工的要求,本文提出并设计了一款创新性的拉刀式切片设备.为验证该设备的结构合理性和运行稳定性,采用有限元分析方法对其进行系统的静力学分析,以评估设备在承受切削载荷时的应力分布与变形情况;同时开展模态分析,获取设备的固有频率与振型,避免工作过程中发生共振现象;进一步进行谐波响应分析,模拟设备在周期性切削力作用下的振动特性,评估其动态稳定性.综合分析结果表明,该设备在理论层面上具备足够的结构强度和良好的稳定性,能够满足金枪鱼生鱼片切片的动作要求.

To effectively reduce production costs and significantly improve slicing efficiency during the processing of tuna sashimi,while meeting the requirements for raw consumption,this paper proposed and designd an innovative pull-knife slicing device.To verify the structural rationality and operational stability of this equipment,the study employed finite element analysis(FEA).A systematic static analysis was conducted to evaluate stress distribution and deformation under cutting loads.Additionally,a modal analysis was performed to obtain the natural frequencies and vibration modes,thereby avoiding resonance during operation.Furthermore,a harmonic response analysis was carried out to simulate the vibration characteristics under periodic cutting forces and assess dynamic stability.The comprehensive analysis indicated that,from a theoretical standpoint,the device possessed sufficient structural strength and favorable stability,effectively meeting the motion requirements for slicing tuna sashimi.

易振兴;顾平灿;叶治政

浙江海洋大学海洋工程装备学院,舟山 316022浙江海洋大学海洋工程装备学院,舟山 316022舟山市海大科学技术研究院有限责任公司,舟山 316041

农业科技

金枪鱼生食加工机械加工有限元分析

Tunasashimi processingmachiningfinite element analysis(FEA)

《现代农业装备》 2026 (4)

55-62,8

国家自然科学基金青年科学基金项目(52505293)

10.3969/j.issn.1673-2154.2026.04.007

评论