电子束辐照对炭黑填充聚醚型热塑性聚氨酯结构及其性能的影响OA
Effects of electron beam irradiation on the structure and properties of carbon black-filled polyether-based thermoplastic polyurethane
用电子束(EB)对炭黑填充聚醚型热塑性聚氨酯进行辐照改性,吸收剂量分别为0 kGy、10 kGy、25 kGy和50 kGy.通过衰减全反射傅里叶变换红外光谱(ATR-FTIR)、差示扫描量热法(DSC)、动态热机械分析(DMA)、力学性能测试、摩擦磨损测试及扫描电子显微镜(SEM),系统考察了吸收剂量对mTPU微观结构、热转变行为、动态力学性能及耐磨性能的影响.结果表明,在本研究剂量范围内,EB辐照对mTPU总体表现为交联效应占主导地位.随剂量增加,材料拉伸强度由41.70 MPa提高至48.46 MPa;断裂伸长率从800%增至840%.DSC结果显示,熔融温度和结晶温度随剂量升高而升高,熔融焓呈先降后升趋势,表明辐照对结晶行为存在非单调调控效应,高剂量下有序结构的热稳定性提高.DMA结果表明,25 kGy样品具有最高的橡胶态平台模量和表观交联密度,说明其综合热机械性能最佳.50 kGy样品则表现出最低的磨损量和摩擦因数,耐磨性最优.本研究表明,EB辐照可有效调控炭黑填充聚醚型TPU的结构与性能,其中25 kGy更适于兼顾力学与热机械性能,50 kGy更适于耐磨性优先的应用场景,为EB辐照改性聚醚型TPU材料在高端电缆护套、汽车零部件等领域的应用提供了实验依据.
Carbon black-filled polyether-based thermoplastic polyurethane was modified by electron beam(EB)irradiation at absorbed doses of 0 kGy,10 kGy,25 kGy,and 50 kGy.The dose-dependent variations in microstructure,thermal transitions,dynamic mechanical properties,and wear resistance were systematically investigated using attenuated total reflectance Fourier transform infrared spectroscopy(ATR-FTIR),differential scanning calorimetry(DSC),dynamic mechanical analysis(DMA),tensile testing,tribological testing,and scanning electron microscopy(SEM).The results demonstrated that EB irradiation predominantly induced crosslinking within the investigated dose range.With increasing dose,tensile strength improved from 41.70 MPa to 48.46 MPa,while elongation at break increased from 800%to 840%.DSC analysis revealed that both the melting and crystallization temperatures increased with increasing dose,while the melting enthalpy initially decreased and then increased,indicating a non-monotonic effect of irradiation on crystallization behavior,with enhanced thermal stability of ordered structures at high doses.DMA results showed that the 25 kGy sample exhibited the highest rubbery plateau modulus and apparent crosslink density,suggesting optimal comprehensive thermomechanical performance.Notably,the 50 kGy sample demonstrated the lowest wear rate and friction coefficient,representing superior wear resistance.These findings indicate that EB irradiation effectively tailors the structure and properties of carbon black-filled polyether-based TPU:25 kGy is optimal for applications requiring balanced mechanical and thermomechanical properties,whereas 50 kGy is preferable for wear resistance-critical scenarios.This study provides experimental evidence supporting the application of EB-irradiated polyether-based TPU in advanced cable sheaths,automotive components,and related fields.
黄志良;梁明晖;冯仕博;刘宇豪;李义浩;董春雷
池州学院材料与环境工程学院 池州 247000池州学院材料与环境工程学院 池州 247000池州学院材料与环境工程学院 池州 247000池州学院材料与环境工程学院 池州 247000池州学院材料与环境工程学院 池州 247000池州学院材料与环境工程学院 池州 247000
化学化工
电子束辐照聚醚型热塑性聚氨酯交联力学性能耐磨性能
Electron beam irradiationPolyether-based thermoplastic polyurethaneCrosslinkingMechanical propertiesWear resistance
《辐射研究与辐射工艺学报》 2026 (4)
43-57,15
安徽省高校理工科教师赴企业挂职实践计划项目(2025jsqygz005)和安徽省教育厅自然科学研究重点项目(2025AHGXZK30012) Supported by Anhui Province University Science and Engineering Teachers Enterprise Secondment Practice Program Project(2025jsqygz005)and Key Project of Natural Science Research of Anhui Provincial Department of Education(2025AHGXZK30012)
评论