首页|期刊导航|福建冶金|Yb2O3助烧剂对Al2O3/SiCw复合陶瓷刀具的性能影响研究

Yb2O3助烧剂对Al2O3/SiCw复合陶瓷刀具的性能影响研究OA

The Effect of Yb₂O₃ Sintering Aid on the Performance of Al2O3-SiCw Composite Ceramic Cutting Tools

中文摘要英文摘要

Al2O3/SiCw复合陶瓷刀具在难加工材料切削中具有广阔应用前景,本文通过研究制备 Al2O3/SiCw陶瓷的真空热压烧结工艺,系统分析了 Yb2O3 添加量(0.5%~2.5%)对材料微观结构、力学性能及切削镍基高温合金时刀具磨损行为的影响.结果表明,Yb2O3 所生成的晶界玻璃相能有效促进致密化.材料的硬度和断裂韧性随 Yb2O3 含量的增加均呈现先上升后下降的趋势,在 1.5%添加量下获得最佳的强度与韧性匹配.切削试验中的刀具磨损量表现出先减小后增大的变化规律,在 1.5%Yb2O3 的陶瓷刀片展现出最优异的抗磨损性能.本研究为高性能陶瓷刀具的微观结构设计及难加工材料的高效切削提供了理论依据.

Al2O3/SiCw composite ceramics show great potential in cutting difficult-to-machine materials.This paper systematically analyzes the effects of Yb2O3 addition(0.5%to 2.5%)on the microstructure,mechanical properties,and tool wear behavior during machining of nickel-based superalloys,by studying the vacuum hot-press sintering process of Al2O3/SiCw ceramics..The results indicate that the intergranular glass phase formed by Yb2O3 effectively promotes densification.Both hardness and fracture toughness first increase and then decrease with rising Yb2O3 content,achieving the best strength-toughness match at 1.5%addition.The tool wear amount in cutting tests exhibits a trend of first decreasing and then increasing.The ceramic insert with 1.5%Yb2O3 demonstrates the best wear resistance.This study provides a theoretical basis for the microstructural design of high-performance ceramic tools and the efficient machining of difficult-to-cut materials.

黄奕芳;郑文庆;蔡晓康;翁志敏;刘超

厦门钨业股份有限公司,福建 厦门 361000||福建省工业控股集团有限公司,福建 福州 350011厦门钨业股份有限公司,福建 厦门 361000||国家钨材料工程技术研究中心,福建 厦门 361000||厦门市硬质合金重点实验室 福建 厦门 361000厦门钨业股份有限公司,福建 厦门 361000||国家钨材料工程技术研究中心,福建 厦门 361000||厦门市硬质合金重点实验室 福建 厦门 361000厦门钨业股份有限公司,福建 厦门 361000||国家钨材料工程技术研究中心,福建 厦门 361000||厦门市硬质合金重点实验室 福建 厦门 361000厦门钨业股份有限公司,福建 厦门 361000||国家钨材料工程技术研究中心,福建 厦门 361000||厦门市硬质合金重点实验室 福建 厦门 361000

Al2O3/SiCw复合陶瓷Yb2O3 烧结助剂微观结构切削性能镍基高温合金

Al2O3/SiCw composite ceramicsYb2O3 sintering aidmicrostructurecutting performancenickel-based superalloys

《福建冶金》 2026 (5)

52-55,4

福建省青年科技人员育成项目(项目号:2025350367)

评论