复合土钉墙支护基坑整体稳定性变化规律研究OA
Research on Overall Stability of Foundation Pit Supported by Composite Soil Nail Wall
为提升复杂地质与周边环境条件下复合土钉墙支护基坑的整体稳定性,文中以贵州贵阳某基坑工程为案例,基于强度折减法理论,结合Abaqus软件建立三维有限元模型,模拟分析土钉长度、倾角及间距等关键设计参数对基坑变形特性、土钉轴力分布及安全系数的影响.结果表明,随着土钉长度由3 m增至9 m,坡顶水平与竖向位移分别降低42.27%、28.10%;土钉倾角为20°时,安全系数最高;土钉间距增大则导致位移显著增加,稳定性下降.研究结果表明,土钉长度9.0 m、间距1.0 m、倾角20°的参数组合,可显著提升支护体系的整体稳定性,有效控制基坑变形.
To enhance the overall stability of the composite soil nail wall support for the foundation pit under complexgeological and surrounding environmental conditions,this paper takes a certain foundation pit project in Guiyang,Guizhou as the background.By combining the strength reduction method theory with the Abaqus software,a three-dimensional finite element model is established to simulate and analyze the influence laws of key design parameters such as the length,inclination angle,and spacing of the soil nails on the deformation characteristics of the foundation pit,the distribution of soil nail axial forces,and the safety factor.The results show that as the length of the soil nail increases from 3 m to 9 m,the horizontal and vertical displacements at the slope top decrease by 42.27%and 28.10%respectively;when the inclination angle of the soil nail is 20°,the safety factor is the highest;when the spacing of the soil nail increases,the displacement increases significantly and the stability decreases.In summary,using the parameter combination of soil nail length of 9.0 m,spacing of 1.0 m,and inclination angle of 20° can significantly improve the overall stability of the support system and effectively control the development of deformation.
曾勇
中建材贵州勘测设计工程有限公司,贵州 贵阳 550081
建筑与水利
强度折减法复合土钉墙基坑稳定性安全系数参数优化
Strength reduction methodComposite soil nail wallFoundation pit stabilitySafety factorParameter optimization
《江西建材》 2026 (5)
37-40,44,5
评论