A method for evaluating the stability of roadway surrounding rock based on a modified damage evolution characteristic model considering rock mass residual strength and 3D DEMOA
Repetitive mining in multi-seam conditions induces cumulative damage to surrounding rock,significantly increasing the risk of roadway instability.Taking the roadway in the extra-thick coal seam fully mechanized topcoal caving face as the research object,this study innovatively developed a modified damage evolution characteristic model that considers the residual strength of rock mass to quantify the regulatory effect of damage variable D on roof fracture span:damage to the main roof reduces the initial and periodic fracture spans,significantly increasing the probability of sliding and rotational instability of the voussoir beam structure.On this basis,a three-dimensional discrete element method(3D DEM)model was established,and orthogonal tests were designed to reveal the coupling mechanism of the spatial position of fracture lines and coal pillar width on rock mass damage.The results show that when the coal pillar width increases from 8 m to 16 m,the peak stress at the roadway ribs decreases by 26.5%-43.3%,and the influence range of the second invariant of the deviatoric stress tensor(J_(2))shrinks.The attenuation of stress gradient leads to a decrease in the evolution rate of plastic damage with increasing coal pillar width,while the position of the fracture line has a weak regulatory effect on the stressplastic response of the coal pillar.The results of theoretical analysis and 3D DEM simulations have effectively guided on-site engineering practice.
Shengrong Xie;Yuxuan Wang;Yiyi Wu;Jian Yang;Zhigen Wang
School of Energy and Mining Engineering,China University of Mining&Technology(Beijing),Beijing,100083,ChinaSchool of Energy and Mining Engineering,China University of Mining&Technology(Beijing),Beijing,100083,ChinaSchool of Energy and Mining Engineering,China University of Mining&Technology(Beijing),Beijing,100083,China State Key Laboratory for Tunnel Engineering,China University of Mining and Technology(Beijing),Beijing,100083,China College of Construction Engineering,Jilin University,Changchun,130021,ChinaSchool of Energy and Mining Engineering,China University of Mining&Technology(Beijing),Beijing,100083,ChinaChina Coal Huayu Nanyangpo Coal Industry Co.,Ltd.,Shuozhou,036999,China
矿业与冶金
Multi-seam miningModified damage evolution characteristicmodel Three-dimensional discrete element method(3D DEM)Coal pillar widthFracture line position
《Rock Mechanics Bulletin》 2026 (2)
P.101-120,20
supported by the National Natural Science Foundation of China(No.52074296)。
评论