首页|期刊导航|Fluid Dynamics & Materials Processing|Thermo-Hydraulic Performance and Entropy Generation Analysis of Serpentine and Straight Tubes with Twisted Tape Inserts Using SST k-ω Turbulence Modeling

Thermo-Hydraulic Performance and Entropy Generation Analysis of Serpentine and Straight Tubes with Twisted Tape Inserts Using SST k-ω Turbulence ModelingOA

中文摘要

Serpentine heat exchangers are extensively used in energy and chemical engineering owing to their compact geometry and high thermal performance.To improve their efficiency,three-dimensional numerical simulations are conducted using the SST k-ω turbulence model for both serpentine and straight tubes fitted with twisted tape inserts.Three twist ratios(y=5.77,8.57,12.48)are examined across a Reynolds number range of 10,000 to 22,000.Results show that the average Nusselt number increases with Reynolds number,while the friction factor decreases.In particular,due to curvature-driven secondary motions,serpentine configurations consistently outperform straight tubes in thermal performance.The addition of twisted tapes intensifies fluid mixing through strong swirl generation,disrupting the thermal boundary layer and significantly enhancing heat transfer,albeit with increased flow resistance.Among all cases,the lowest twist ratio(y=5.77)generates the strongest swirl intensity and highest turbulent kinetic energy,yielding maximum thermal augmentation but also the greatest pressure drop.Performance Evaluation Criterion analysis indicates PEC>1 for all twisted tape configurations under equal pumping power,confirming an overall beneficial trade-off between enhancement and hydraulic penalty.Entropy generation results further demonstrate that improved thermal performance is accompanied by higher irreversibility.Overall,the combination of serpentine geometry with low to moderate twist ratios offers the most favorable thermo-hydraulic balance for compact heat exchanger optimization.

Conghai Chen;Dingran Sun;Yikai Chen;Jianxin Xu;HuaWang

State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization,School of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming,ChinaFaculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming,ChinaFaculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming,ChinaFaculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming,ChinaFaculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming,China

能源科技

Serpentine tubetwisted tape insertsturbulent heat transfer enhancemententropy generation analysisthermo-hydraulic performance

《Fluid Dynamics & Materials Processing》 2026 (6)

P.159-190,32

funded by the National Key Research and Development Program of China(grant number 2022YFC3902000)the National Natural Science Foundation of China(grant number 52166004)the Central Guidance on Local Scientific and Technological Development Funds(grant number 202407AB110022)the Yunnan Fundamental Research Projects(grant number 202501AS070131).

10.32604/fdmp.2026.082984

评论