Effects of solidification rates on precipitation behavior of nano-particles and precipitation strengthening of ZA81M alloyOA
In this work,the solidification behavior and precipitation strengthening of Mg-8Zn-1Al-0.5Cu-0.5Mn(wt%,ZA81M)alloy solidified with different cooling rates of solidification were investigated.Selected area electron diffraction(SAED)analysis revealed the presence of rod-like nano-particles with an Mg_(4)Zn_(7) structure(β_(i)′)and plate-like nano-particles with an MgZn_(2) structure(β_(2)′).X-ray diffraction(XRD)and Energy dispersive spectrometer(EDS)indicate that the coarse second phases in the solidification structure are MgZn eutectic phase,MgZnCu separated eutectic phase,and AIMn phase.The effect of precipitation strengthening was caused by the precipitated phases in the solidified microstructure.The quantities of both β_(1)′and β_(2)′significantly decreased with an increase in cooling rate from 0.70℃·s^(-1) to 33.98℃·s^(-1),resulting in a reduction of Vickers hardness from 87.70 to 75.53 HV.The higher cooling rate of solidification effectively inhibited the formation of precipitates,thereby diminished the precipitation-strengthening effect.Two orientation relationships(ORs)were identified between the nano-particles β_(1)′and β_(2)′and the Mg substrate:basal and pyramidal precipitates,respectively.Specifically,the β_(1)′phase exhibited the following ORs:(312)_(β_(1)′)//(0002)_(Mg),(-912)_(β_(1)′)//(10-11)_(Mg),(-1003)_(β_(1)′)//(10-11)_(Mg),and(110)_(β_(1)′)//(10-11)_(Mg).Moreover,the β_(2)′phase exhibited ORs with basal and pyramidal planes,presented as(11-20)_(β_(2)′)//(0002)_(Mg) and(10-13)_(β_(2)′)//(10-11)_(Mg).In addition,the variation of coarse second phase and nano-particle precipitated phase shows a competitive relationship,which is attributed to the microsegregation of Zn element.Precipitation strengthening mainly improves microhardness,and tensile mechanical properties are mainly affected by fine-grain strengthening.
Jian-Guang Feng;Tian-Jiao Luo;Qiu-Yan Huang;Ying-Ju Li;Xiao-Hui Feng;Yuan-Sheng Yang
Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China School of Materials Science and Engineering,University of Science and Technology of China,Shenyang 110016,ChinaInstitute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,ChinaInstitute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,ChinaInstitute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,ChinaInstitute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,ChinaInstitute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China
矿业与冶金
Magnesium alloysPrecipitatesSolidification ratePrecipitation strengthening
《Journal of Magnesium and Alloys》 2026 (4)
P.193-206,14
supported by the National Key Research and Development Program of China(No.2021YFB3701100)the Applied Basic Research Program Project of Liaoning Province of China(No.2023020253-JH2/1016)the Key Research and Development Plan of Shanxi Province(No.202102050201005).
评论