首页|期刊导航|Journal of Magnesium and Alloys|Tailoring microstructure and mechanical properties of high-pressure die-cast Mg-RE-Gd alloys via trace Al additions

Tailoring microstructure and mechanical properties of high-pressure die-cast Mg-RE-Gd alloys via trace Al additionsOA

中文摘要

A trade-off between strength and ductility often constrains the widespread application of high-pressure die-casting(HPDC)Mg-RE alloys.This study modulates the intermetallic compounds at the grain boundary(GB)in Mg-3.5RE-1.5Gd alloys through trace Al additions(0,0.5,and 1.0 wt.%).Multiscale characterization and density functional theory(DFT)revealed a transition from metastable Mg_(3)RE(Al-free)to petal-like Al_(2)RE_(3)(0.5Al),followed by the coexistence of blocky Al_(2)RE and striped Al_(11)RE_(3)(1.0Al).As the Al content increases,the Mg_(12)RE network remains the major phase,but its connectivity weakens.At room temperature(RT),yield strength(YS)decreases from 175 to 169 and 165 MPa,whereas ultimate tensile strength(UTS)increases from 180 to 200 and 205 MPa,and elongation(El)rises from 1.9% to 2.3% and 2.4%.At 250℃,the El increased while both YS and UTS decreased.At 300℃,the Al-containing alloy exhibited a comparatively high level of El,though this was lower than that observed in the Al-free alloy.This outcome is consistent with the weakened Mg_(12)RE network connectivity.The fracture analysis revealed a mixed quasi-cleavage fracture with dimples at RT.At elevated temperatures,the predominant form of fracture is intergranular ductile fracture.DFT calculations confirm that Al-RE compounds exhibit more negative formation enthalpies and higher moduli than Mg-RE phases.However,the continuous Mg_(12)RE framework phase provides superior GB pinning and load transfer capabilities.The present study elucidates the Al-mediated phase control mechanism,thus offering a viable alloy design pathway for the optimization of HPDC Mg-RE alloys.

Lingyun Feng;Xixi Dong;Shihao Wang;Qing Cai;Hangbiao Mi;Wei Guo;Shouxun Ji

State Key Laboratory of Intelligent Manufacturing Equipment and Technology,School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan,Hubei 430074,ChinaCollege of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,ChinaSuperSTEM Laboratory,SciTech Daresbury Campus,Daresbury WA44AD,UK School of Chemical and Process Engineering,University of Leeds,Leeds LS29JT,UKBrunel Centre for Advanced Solidification Technology(BCAST),Brunel University London,Uxbridge,Middlesex UB83PH,UKState Key Laboratory of Intelligent Manufacturing Equipment and Technology,School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan,Hubei 430074,ChinaState Key Laboratory of Intelligent Manufacturing Equipment and Technology,School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan,Hubei 430074,ChinaBrunel Centre for Advanced Solidification Technology(BCAST),Brunel University London,Uxbridge,Middlesex UB83PH,UK

矿业与冶金

Magnesium alloysMicrostructuresMechanical propertiesDFTStrengthening mechanisms

《Journal of Magnesium and Alloys》 2026 (4)

P.511-528,18

supported by the National Key Research and Development Program of China (No.2023YFB4606000)National Outstanding Youth Science Fund Project of National Natural Science Foundation of ChinaNational Natural Science Foundation of China (No.52575400)Jiangsu Specially-Appointed Professor project and Innovate UK (No. 10113213 and No 103962)supported by EPSRC under grant number EP/W021080/1.

10.1016/j.jma.2026.102023

评论