Charge transfer between the MgH_(2) and TiO_(2) surface of the MgH_(2)/TiO_(2)/Ni_(3)ZnC_(0.7) composite with good cyclic reliabilityOA
In order to improve the hydrogen storage properties of MgH_(2),the layered Ni_(3)ZnC_(0.7) loaded TiO_(2) composite with bamboo-like carbon nanotubes on surface is prepared by filtration followed with calcination.The MgH_(2)-2.5 wt%TiO_(2)/Ni_(3)ZnC_(0.7) composite can absorb 4.13 wt%H_(2) at 423 K and 600 s,and release 4.02 wt%H_(2) at 573 K and 60 min.The hydrogen absorption/desorption activation energies are decreased to 41.92 and 95.18 kJ mol^(-1) H_(2),respectively.The hydrogen storage capacity exhibits little changes under different temperatures and pressures(110 cycles),clearly imply its cycle stability of this composite.The in-situ generated Mg_(2)Ni/Mg_(2)NiH_(4) acts as a“hydrogen pump”providing additional channels for hydrogen diffusion and the presence of carbon nanotubes limits the aggregation and growth of Mg/MgH_(2) particles.Moreover,multivalent Ti provides bridges and catalytically active sites for electron transfer between.During the broken process of Mg-H bonds,Bader charge maps indicate that H is bonded with Ti and Mg is bonded with O;After another MgH_(2) absorbed,two H atoms are coordinated to Ti,implying that the TiO_(2) acts as“charge regulator”.The deep understanding of the charge transfer between the MgH_(2) and TiO_(2) surface of the MgH_(2)/TiO_(2)/Ni_(3)ZnC_(0.7) composite should provide new sight for designing MXene and Ni_(3)ZnC_(0.7) derived catalysts.
Ping Wu;Ziyin Dai;Xiaoran Qin;Manfu Jiang;Cui Ni;Hideo Kimura;Shengjian Qin;Chuanxin Hou;Wei Du;Xiubo Xie
School of Environmental and Material Engineering,Yantai University,No.30 Qingquan Road,Yantai 264005,ChinaSchool of Environmental and Material Engineering,Yantai University,No.30 Qingquan Road,Yantai 264005,ChinaSchool of Environmental and Material Engineering,Yantai University,No.30 Qingquan Road,Yantai 264005,ChinaSchool of Environmental and Material Engineering,Yantai University,No.30 Qingquan Road,Yantai 264005,ChinaSchool of Environmental and Material Engineering,Yantai University,No.30 Qingquan Road,Yantai 264005,ChinaSchool of Environmental and Material Engineering,Yantai University,No.30 Qingquan Road,Yantai 264005,ChinaSchool of Materials Science and Engineering,Shijiazhuang Tiedao University,Shijiazhuang 050043 Hebei,ChinaSchool of Environmental and Material Engineering,Yantai University,No.30 Qingquan Road,Yantai 264005,ChinaDepartment of Chemical Engineering and Safety,Shandong University of Aeronautics,Binzhou 256603,ChinaSchool of Environmental and Material Engineering,Yantai University,No.30 Qingquan Road,Yantai 264005,China
通用工业技术
Mg-based hydrogen storage materialsMultiple catalystsHydrogen storage kineticsCharge transferNi_(3)ZnC_(0.7)catalysts
《Journal of Magnesium and Alloys》 2026 (4)
P.582-594,13
financially supported by Natural Science Foundation of Shandong Province(Grant No.ZR2025MS945,ZR2020QE011,ZR2022ME089)National Natural Science Foundation of China(Grant No.52101274,52472131)Yantai Basic Research Project(Grant No.2024JCYJ097)Key Research and Development Projects of Shandong Province(Grant No.2024TSGC0402)Youth Top Talent Foundation of Yantai University(Grant No.2219008)College Student Innovation and Entrepreneurship Training Program Project(Grant No.202311066088)Graduate Innovation Foundation of Yantai University(Grant No.GGIFYTU2554).
评论