公路半刚性基层水泥稳定碎石材料的强度分析OA
Strength Analysis of Cement-stabilized Crushed Stone Material for Semi-rigid Pavement Base
为优化公路半刚性基层水泥稳定碎石材料配合比设计,文中开展了强度特性试验,设置3%、3.5%、4%、4.5%、5%五种水泥掺量,测试材料在7、28、90 d 三个养护龄期下的无侧限抗压强度、劈裂强度和抗压回弹模量,分析水泥掺量对材料强度的影响规律.结果表明,随着水泥掺量从3%增加到4.5%,7 d 龄期无侧限抗压强度由2.85 MPa 提升至4.28 MPa,增幅达50.2%,但水泥掺量继续增至5%时,强度反而下降至4.06 MPa.劈裂强度和回弹模量呈现相同变化趋势,均在4.5%掺量时达到最优值,能够为相关人员开展工作提供技术依据.
To optimize the mix design of cement-stabilized crushed stone for semi-rigid base layers in highway construction,this study conducted systematic strength characteristic tests.By setting five cement content levels(3%、3.5%、4%、4.5%and 5%),we measured the unconfined compressive strength,splitting strength,and compressive rebound modulus of materials at three curing stages(7、28、90 d),exploring the influence of cement content on material strength.Results showed that as cement content increased from 3%to 4.5%,the 7-day unconfined compressive strength rose by 50.2%from 2.85 MPa to 4.28 MPa.However,when cement content reached 5%,the strength decreased to 4.06 MPa.Both splitting strength and rebound modulus followed the same trend,reaching optimal values at 4.5%cement content.These findings provide technical guidance for professionals in highway engineering.
夏林清
江西中虹建筑有限公司,江西 南昌 330224
建筑与水利
水泥稳定碎石半刚性基层无侧限抗压强度劈裂强度回弹模量
Cement-stabilized crushed stoneSemi-rigid baseUnconfined compressive strengthSplitting strengthRebound modulus
《江西建材》 2026 (4)
89-91,3
评论