聚磷酸铵改性纳米涂层阻燃隔热性能及工程应用OA
Flame Retardant and Heat Insulation Performance and Engineering Application of Ammonium Polyphosphate Modified Nano-coating
为提升建筑的阻燃隔热性能,文中通过机械共混法制备聚磷酸铵改性纳米涂层,系统分析了阻燃剂掺量及涂层厚度对聚磷酸铵改性纳米涂层阻燃性能及力学性能的影响,确定最佳阻燃剂掺量及最佳涂层厚度,并对其工程应用效果进行评价.结果表明,最佳聚磷酸铵阻燃剂掺量为20%,最佳阻燃剂涂层厚度为0.4 mm.实践可知,聚磷酸铵改性纳米涂层所有检测指标均在设计允许值范围内,其阻燃性能由未处理前的23%提升至36%,拉伸强度与弯曲强度分别较未处理试样提升17%和25%.综上,聚磷酸铵改性纳米涂层具有良好的应用效果,可在类似的建筑结构中推广应用.
To enhance the flame retardant and heat insulation performance of buildings,this paper prepared ammonium polyphosphate modified nano-coatings by mechanical blending method.The effects of flame retardant dosage and coating thickness on the flame retardant performance and mechanical properties of ammonium polyphosphate modified nano-coatings were systematically analyzed.The optimal flame retardant dosage and coating thickness were determined,and the engineering application effects were evaluated.The results show that the optimal dosage of ammonium polyphosphate flame retardant is 20%,and the optimal thickness of the flame retardant coating is 0.4 mm.It is known from practice that all the detection indicators of the ammonium polyphosphate modified nano-coating are within the allowable range of the design.Its flame retardant performance has increased from 23%before treatment to 36%.The tensile strength and flexural strength were increased by 17%and 25%respectively compared with the untreated specimens.In conclusion,the ammonium polyphosphate modified nano-coating has a good application effect and can be promoted and applied in similar building structures.
林肖
遵义市建筑业服务中心,贵州 遵义 563000
化学化工
建筑结构聚磷酸铵阻燃剂阻燃隔热性能工程应用
Building structureAmmonium polyphosphate flame retardantFlame retardant and heat insulation performanceEngineering Ap-plication
《江西建材》 2026 (4)
39-41,72,4
评论