首页|期刊导航|沈阳航空航天大学学报|基于全尺寸仿真方法的涡轮叶片蠕变寿命预测

基于全尺寸仿真方法的涡轮叶片蠕变寿命预测OA

Prediction of turbine blades creep life based on full-scale simulation method

中文摘要英文摘要

涡轮叶片蠕变寿命预测依赖仿真的叶片温度和应力数据,但仿真时常常将完整的涡轮盘简化为单个叶片,导致结果不准确.为了探究单叶片简化模型的合理性,提升叶片蠕变寿命预测的准确性,开展了基于全尺寸仿真方法的涡轮叶片蠕变寿命预测研究.首先,建立涡轮盘全尺寸仿真方法和单叶片简化模型;然后,应用混合热流固耦合法计算叶片的温度和最大主应力;最后,用热强参数综合方程来预测叶片蠕变寿命.结果表明,单叶片模型与全尺寸模型的温度相对误差均不超过2%;二者最大主应力的相对误差均不超过8%;但二者预测蠕变寿命相对误差高达712.93%;单叶片模型的温度和最大主应力仿真结果较低,预测蠕变寿命较大.上述结果证明了采用全尺寸模型分析涡轮叶片蠕变寿命的必要性,为准确预测涡轮叶片的蠕变寿命奠定了基础.

The prediction of creep life for turbine blade relies on simulated blade temperature and stress data.However,simulations often simplify the entire turbine disk to a single blade,leading to inaccurate results.In order to investigate the validity of simplified single-blade models and enhance the accuracy of blade creep life prediction,a study on the creep life of turbine blades based on full-scale simulation method was conducted.First,full-scale simulation method for the turbine disk and a simplified single-blade model were established.Then,the blade temperature and maximum principal stress were calculated using the hybrid thermal-fluid-solid coupling method.Finally,the comprehensive equation of thermal strength parameters was employed to predict the creep life of the blade.The results indicate that the relative error in temperature between the single-blade model and the full-scale model does not exceed 2%;the relative error in maximum principal stress between the two is within 8%;however,the relative error in prediction of creep life between them reaches as high as 712.93%.The single-blade model predicts lower temperatures and maximum principal stresses,resulting in a significantly overestimated creep life.These findings demonstrate the necessity of employing a full-scale model to analyze the creep life of turbine blades and lay a foundation for the accurate prediction of their creep life.

武威;胡春平;姚婷;姚玉东;田晶

中国航发南京航空动力有限责任公司 产品研发中心,南京 210016中国航发南京航空动力有限责任公司 产品研发中心,南京 210016中国航发南京航空动力有限责任公司 产品研发中心,南京 210016西北工业大学 动力与能源学院,西安 710072沈阳航空航天大学 航空发动机学院,沈阳 110136

航空航天

涡轮叶片蠕变寿命全尺寸仿真方法混合流固耦合法热强参数综合方程

turbine bladecreep lifefull-scale simulation methodhybrid fluid-solid coupling methodcomprehensive equation of thermal strength parameters

《沈阳航空航天大学学报》 2026 (2)

25-35,11

辽宁省国际科技合作计划项目资助项目(项目编号:2025JH2/101900009).

10.3969/j.issn.2095-1248.2026.02.004

评论