首页|期刊导航|江西建材|大跨径连续梁桥荷载试验方法与结构性能综合分析

大跨径连续梁桥荷载试验方法与结构性能综合分析OA

Comprehensive Analysis of Load Test Methods and Structural Performance for Long-span Continuous Girder Bridges

中文摘要英文摘要

文中以某大跨径连续梁桥为研究对象,采用理论分析、数值模拟与现场试验相结合的方法,系统开展了静载与动载荷载试验研究,通过建立精细化三维有限元模型,计算了结构在设计荷载下的理论响应,设计了6 种静载工况和多项动载试验方案,对桥梁控制截面的应变、挠度及动力特性进行了全面测试.试验结果表明,在等效设计荷载作用下,结构应变校验系数为 0.61~0.95,挠度校验系数为0.73~0.95,残余变形比均小于 8%;动力特性测试显示结构基频为 5.23 Hz,高于理论值 3.85 Hz,冲击系数为 1.086~1.109,低于规范计算值1.22.研究验证了该桥具有良好的弹性工作性能、足够的承载安全储备和优异的动力特性,同时建立了桥梁荷载试验技术体系,为同类桥梁的检测评估和运营维护提供了技术参考.

This paper takes a long-span continuous girder bridge as the research object and systematically conducts static and dynamic load test studies using a combined approach of theoretical analysis,numerical simulation,and field testing.By establishing a refined three-dimensional finite element model,the theoretical responses of the structure under design loads are calculated.Six static load conditions and multiple dynamic load test schemes are designed to comprehensively test the strain,deflection,and dynamic characteristics of key bridge control sections.The test results indicate that under equivalent design loads,the structural strain calibration coefficients range from 0.61 to 0.95,the deflection calibration coefficients range from 0.73 to 0.95,and the residual deformation ratios are all below 8%.Dynamic characteristic tests show that the fundamental frequency of the structure is 5.23 Hz,which is higher than the theoretical value of 3.85 Hz,and the impact coefficient ranges from 1.086 to 1.109,lower than the code-calculated value of 1.22.The study verifies that the bridge possesses excellent elastic working performance,sufficient load-bearing safety reserves,and superior dynamic characteristics.Additionally,a technical framework for bridge load testing is established,providing technical references for the inspection,evaluation,operation and maintenance of similar bridges.

杨珑

江西省建材产品质量监督检验站有限公司,江西 南昌 330001

交通工程

荷载试验静力性能动力特性有限元分析校验系数

Load testStatic performanceDynamic characteristicsFinite element analysisCalibration coefficient

《江西建材》 2026 (3)

150-154,5

评论